Sleep Master wireless XPAP data transfer

[Jack_Russell_Fan]

It has been awhile since I published a new version for Ubuntu, XP, and Vista.

New v1.0.1.41 is now available at http://www.sleepmaster.org

Tom

[Crimson Nape]

Thank you for all of your work! I'' be taking it for a test byte as soon as my SD-Air arrives.

[krelvin]

Recorded a screen video of how it runs when I use it on my desktop.

Short, no sound, just shows it connecting, getting data, then loading SleepyHead when done and I click on import to get the new data. This was the actual run I did this morning.





I've been using it now for several months. Recent improvements made by Tom which allow the FlashAir to work in Station Mode made it easier to use.

I never pull my SDCard any longer... and I can do this process from anywhere if I remote into my primary workstation.

[Crimson Nape]

krelvin.
Nice presentation!

[Jack_Russell_Fan]

Sleep Master is now tested to be compatible with the Airsense10,
starting with v2.0.1.15 and up!

v2.0.1.15 is available at sleepmaster.org

Also, Sleep Master has been tested to work with the less expensive
Toshiba Flashair Card model R008FR7ALO1 8GB card!

Tom

[krelvin]

made another video to match the changes made in the new version.





This video shows Sleep Master using no click mode where it starts the transfer as soon as the application starts.

Clicking the Start Sleep Data Software button launches the analyzer software when the transfer is completed (in this case SleepyHead) where you can then import the new data.

You can if you choose (not shown in the video), leave Sleep Master running after the transfer and it will transfer again automatically the next day at 1pm.

Once setup, the whole process is very simple and you don't take the SDCard out anymore.

With support now for the 8GB Toshiba FlashAir card which is ~$19 it is very inexpensive way to get your data with little hassle.

[Jack_Russell_Fan]

Just released a new Ubuntu\Wine version! Download at SleepMaster.org.

New in v1.0.1.66

***** For Ubuntu/Wine users - Automatically finds your Flashair card's IP address in station mode.
***** Airsense10 compatibility added!

Tom

[Jack_Russell_Fan]

Just released new version on http://SleepMaster.org .

New in Version 2.0.1.18:

***** Supports multiple users and Flashair cards for those who have more then one XPAP in the home. Each machine must have it's own dedicated Flashair SD card.

***** Easy two click change between users!

Tom

[WSHenry]

I will be going through the process of switching to Sleep Master later today after I get my FlashAir card.

Do I need to copy the contents of the existing SD card to the FlashAir card after preparing in using the Sleep Master application?

[Crimson Nape]

I will be going through the process of switching to Sleep Master later today after I get my FlashAir card.

Do I need to copy the contents of the existing SD card to the FlashAir card after preparing in using the Sleep Master application?

I found that putting the wifiSD in the machine first and letting it get formated then copy all the data from the original card worked best prior to Sleep Master setting up the WiFi side of the card. Basically S-M will ask you to take the same steps (other than copying the data). You really don't need the old data for it to work, it just gave me a warm fuzzy feeling having it all in one place.