OSCAR supported machines
|
|
Afrikaans /
في الصفحة /
български /
中国 /
臺灣 /
čeština/
Dansk /
Deutsch /
Ελληνικά /
Español /
Filipino /
Français /
עברית /
Magyar /
Italiano /
日本語 /
한국어 /
Nederlands /
Norsk /
Polskie /
Português /
Română /
Pусский /
Suomalainen /
Svenska /
ภาษาไทย /
Türkçe |
OSCAR 1.1.0 supports the devices listed below. Most of the machines listed as Not supported do not provide the necessary data for OSCAR to read. Please note that many machines are known by different names in different markets.
Contents
Contents
Philips Respironics Machines
Fully Supported by Oscar
The following machines have been tested and are supported by OSCAR v1.1.0
System One
- REMstar Plus (System One) (251P)
- REMstar Pro (System One) (450P, 451P)
- REMstar Auto (System One) (550P, 551P)
- BiPAP Auto (System One) (750P)
- BiPAP AutoSV Advanced System One (950P)
System One 60
- REMstar Pro (System One 60 Series) (460P, 461P)
- REMstar Auto (System One 60 Series) (560P, 561P, 562P, 560PBT)
- BiPAP Pro (System One 60 Series) (660P)
- BiPAP Auto (System One 60 Series) (760P)
- BiPAP autoSV Advanced (System One 60 Series) (960P, 961P)
- BiPAP autoSV Advanced 30 (System One 60 Series) (960T)
- BiPAP S/T 30 (System One 60 Series) (1061T)
- BiPAP AVAPS 30 (System One 60 Series) (1160P)
Dreamstation CPAP & APAP
- DreamStation CPAP (200X110)
- DreamStation CPAP Pro (400X110, 400X150)
- DreamStation Go (400G110)
- DreamStation Auto CPAP (500X110, 500X120, 500X130, 500X150)
- DreamStation Go Auto (500G110, 502G150)
- DreamStation BiPAP Pro (600X110)
- DreamStation Auto BiPAP (700X110)
Dreamstation BiPAP & ASV
- DreamStation BiPAP autoSV (900X110, 900X120)
- DreamStation BiPAP S/T 30 (1030X110)
- DreamStation BiPAP S/T 30 with AAM (1030X150)
- DreamStation BiPAP AVAPS 30 (1130X110)
- DreamStation BiPAP AVAPS 30 AE (1131X150)
Resmed Machines
Fully Supported by Oscar
The following machines have been tested and are supported by OSCAR v1.1.0
Resmed Airsense 10 and Aircurve 10
- Airsense 10 Elite
- Airsense 10 Autoset
- Airsense 10 AutoSet for Her
- Aircurve 10 S (Lumis 100 VPAP S)
- Aircurve 10 ST (Lumis 150 VPAP ST)
- Aircurve 10 ST-A (Lumis 150 VPAP ST-A)
- Aircurve 10 VAuto
- Aircurve 10 ASV (PaceWave CS)
Resmed S9 Series
- Elite CPAP
- Autoset
- Autoset for Her
- VPAP S
- VPAP Auto
- VPAP ST
- VPAP Adapt (AutoSet CS)
Not Supported by Oscar
- AirStart (all models)
- Airsense 10 CPAP
- AirMini
- S9 CPAP SE
- S9 Escape CPAP
- S9 Escape Auto
- Resmed S8 and earlier series
DeVilbiss
Partly Supported by Oscar
- DV54 Auto
- DV64 CPAP
- DV64 Auto
Fisher & Paykel
Partly supported by Oscar
- Icon
- Icon+
- Sleepstyle
--Note: Fisher & Paykel does not store a "Flow Rate" signal, so no waveform graph, nor analysis is possible, (Events, Pressure, AHI, Snore, Leak Rate, and advanced charts: Resp. Rate, Tidal Volume, Minute Volume, Time at Pressure).
Löwenstein / Weinmann
Partly supported by Oscar
- Prisma
Apex, BMC, Luna
Not supported by OSCAR
_______________
Pulse Oximeters
Oximetry Wizard
Data from the following pulse oximeters can be imported via OSCAR's Oximetry Wizard:
- Contec CMS-50D+, CMS-50-E, CMS-50E
- Contec CMS-50F, CMS-50H, CMS-50I (v3.7 firmware or later)
- Pulox PO-200/300/400/500
Manual Import
Beginning in OSCAR 1.1.0, the following pulse oximeters are imported via OSCAR's Data > Import Viatom Data... menu. See Viatom File Import for how to download and import their data files.
- Viatom/Wellue SleepU
- Viatom/Wellue O2Ring
Sleep Monitors
Data from the following sleep monitors may be input via the Data menu.
- Zeo
- Dreem
- Somnopose
Donate to Apnea Board