[Equipment] How to clean the tube and mask？

[frostfish]

Hello everyone, I am a new comer.

I want to know how you guys clean the tube and mask, alcohol or ozone?

[DariaVader]

dish soap and water sometimes vinegar and water. There are many threads on it... look at the related threads on the bottom of this page, bet there are several there

[zonk]

Hello everyone, I am a new comer.

I want to know how you guys clean the tube and mask, alcohol or ozone?

Hi frostfish and welcome to the forum
I use soap and hot water for cleaning, hook the hose to the hot water tap and hang to dry. Having spare is good idea but you'll accumulate some in no time. Never seen any deposit build-ups in the water tank but can be removed with a solution of one part household vinegar to 10 parts water. No such problem using distilled water and dumping after each use

Cleaning masks http://www.resmed.com/epn/en/healthcare-...masks.html
Water tub and tubes http://www.resmed.com/epn/en/healthcare-...ifier.html

[trish6hundred]

Hi frostfish,
WELCOME! to the forum.!
I wash my hose, mask and water chamber in warm, mild soapy, (Ivory Liquid,) water, once a week and in between times I use a CPAP wipe. Sometimes, when I buy supplies on line, they offer them as a promotional for one cent..
Hang in there for more responses to your post and much success to you with your CPAP therapy.

[iseeksleep]

Hello everyone, I am a new comer.

I want to know how you guys clean the tube and mask, alcohol or ozone?

I'm also a new comer - how often do folks clean their tubes? I wipe down my nasal pillow when I think about it, but don't remember ever cleaning the tube. Just typing that sounds disgusting, so I'll wash it out soon.

[DeepBreathing]

G'day iseeksleep, welcome to Apnea Board. There's no one right answer to this. I clean everything weekly - it's a bit of a Sunday morning ritual. I wash everything in really hot water with ti-tree oil soap (just because it's convenient in the dispenser) then rinse in very hot water and allow to air dry.

[Eaglethunder09]

Greetings and welcome aboard!
I have been using cpap for 12 years, and having to clean it every week was a lot of work. Over the years I found vinegar/water in a plastic tub to work well. Use a cup of white vinegar to 3 gallons of water, let it soak all day. Rinse off and dry, and its ready to go. I got a "SoClean 2" a couple months ago and it has cut way down on the hassles. It plugs into the cpap via a tube. You put your mask and teeth guard into it, it comes on based on schedule ... runs for 7 minutes flooding with ozone, blows out the ozone for 2 hours then you are ready to go. That way I get a clean machine every day. No more sinus clogging.

[regbeach]

I clean my mom's seal on her mask daily. Early on, I was told to clean it weekly. This resulted in unnecessary noises and leaks. If I don't clean it daily, she has even more issues than we are trying to solve now. I can't stress enough how much cleaning the mask seal daily reduced the noises during the night.
Mild dish detergent (unscented) on a warm paper towel, rinse with warm water, shake and air dry. I clean hose, humidity chamber and rest of the mask weekly with the same mild dish detergent. I rinse filter and pat dry in a paper towel. It takes less than 5 minutes to do it all once you get a system going. To clean the hose, I put a couple drops of dish detergent in a tall glass, add water, then pour it into the hose while holding both ends up so the water fills the hose. I fill remainder of hose with running water from the faucet. If you lift one end of hose higher, the water will push itself out. Then, I fill hose with non-soapy water to rinse it out a couple times. I hang the hose to dry but it never dries completely like that. When filter is dry, I attach hose to machine and turn it on. The air blow dries the hose in about 15 mins.
I use distilled water in the humidity chamber and haven't seen any build-up so have not used vinegar but it was suggested.