Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

I’m at my wits end [Resmed S9 VPAP error message]
#11
RE: I’m at my wits end [Resmed S9 VPAP error message]
I can't imagine how you have multiple complete machines, and they all throw the same fault. I can direct you to the H5i Humidifier Service Manual, but I'm not sure that is helpful http://www.sleepfiles.com/servicemanuals...Manual.pdf At least this can give you some items for inpection.

There are several reasons for the humidifier/replace error code. It might clear up if you use room temperature or warmer water.

It seems you need a VPAP or bilevel to provide the high pressures indicated in your profile of 20-24. I assume that is EPAP and IPAP at a constant pressure? There are a couple Aircurve 10 VPAP-S units on Amazon for $475 and $575, the Aircurve 10 Vauto on Amazon is $1195 through MedGuru. Your other choice is of course to go back through your insurance for a replacement. The fact you have a broken machine should be enough to qualify for repair or replacement.

Where did you acquire the used machines? (no links just a name). Have you asked them about replacement?
Sleeprider
Apnea Board Moderator
www.ApneaBoard.com

____________________________________________
Download OSCAR Software
Soft Cervical Collar
Optimizing Therapy
Organize your OSCAR Charts
Attaching Files
Mask Primer
How To Deal With Equipment Supplier


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#12
RE: I’m at my wits end [Resmed S9 VPAP error message]
I purchased it through CPAP liquidators and I assume that they probably have a couple of suppliers they use and I have been dealing with Second Wind CPAP and I have not one bad thing to say about them their service has been great. They sent me a replacement no questions asked.

I haven’t even contacted the insurance. It’s like pulling teeth to get them to pay for anything and I have a $3000 deductible and my year just restarted in Jan.

As far as the water temp I can try but all of the settings are rhe same as they were before the break. I just keep a gallon of distilled water on the bottom shelf on my night stand and pot it in every night. We keep the house at 68 and I only have the machine set to 70.

Hopefully I have answered all of your questions.
Post Reply Post Reply
#13
RE: I’m at my wits end [Resmed S9 VPAP error message]
SecondWindCPAP is a great outfit, and have backed up their products. Multiple failures are rare, but they have happened. I recall a SecondWind customer in Australia with blower motor problems, and finally was offered a new machine.

I would give them a call and see if you could possibly upgrade this purchase after the two prior failures.
Sleeprider
Apnea Board Moderator
www.ApneaBoard.com

____________________________________________
Download OSCAR Software
Soft Cervical Collar
Optimizing Therapy
Organize your OSCAR Charts
Attaching Files
Mask Primer
How To Deal With Equipment Supplier


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#14
RE: I’m at my wits end [Resmed S9 VPAP error message]
SecondWindCPAP has been understanding and awesome through this whole ordeal. The owner actually called me about an hour ago and he told me that he was overnighting a brand new machine.
Post Reply Post Reply
#15
RE: I’m at my wits end [Resmed S9 VPAP error message]
Congrats on the good news for a replacement.
Mask Primer

Positional Apnea

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEBSITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#16
RE: I’m at my wits end [Resmed S9 VPAP error message]
Hi Odonnell84,
WELCOME! to the forum.!
Hopefully you received your new machine and that it is working.

Good luck as you continue CPAP therapy.
trish6hundred
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
Sad [CPAP] Res Med S9 help! Error: Settings reset to default values, please contact service pr dexter020281 23 35,796 12-20-2024, 02:56 AM
Last Post: Jarqui
  At my wits end, ready to give up MX117 16 613 12-10-2024, 10:12 PM
Last Post: LuminousOne
  [Equipment] DreamStation "Check Power" message HerbieK 2 7,181 12-03-2024, 12:53 AM
Last Post: Ray.alissa
Question Struggling with VPAP - Meeting Sleep Tech tomorrow! JRC81 10 420 11-25-2024, 02:29 PM
Last Post: SarcasticDave94
  Service Required Message jmack729 2 284 11-06-2024, 11:57 AM
Last Post: StratCat48
  Resmed Airsense 10 Error 006 lanecito 2 389 11-03-2024, 06:24 PM
Last Post: PeaceLoveAndPizza
  Error Message GUI Lib Invalid from Dreamstation 2 amybinaz 5 653 10-21-2024, 12:56 PM
Last Post: rkreiple


New Posts   Today's Posts


About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.