07-31-2023, 01:24 AM
APAP Pressure settings - narrower better?
I read a comment by someone here (sorry cannot remember their name) that with APAP when Minimum Pressure is closer to Max Pressure the machine can respond faster (during REM for example) and up the pressure quicker which also helps to keep SpO2 levels stable.
I'd like some guidance on if it would be an idea for me to narrow my current pressure range further please.
My 95% pressure is fairly stable at around 13.5
Machine and settings:-
ResMed 10 Autoset
Min pressure 10.6
Max pressure 15
EPR 2 full time
Could it be an idea for me to up my minimum pressure to 11 - or even a bit higher?
If so, is it safe to increase the Min pressure up a whole point in one go?
BACKGROUND
Severe OSA
Improvements to my therapy have been gradual but over 90 days of use with machine am seeing reasonable results now.
AHIs - usually under 1
SATs sometimes 9.8, mainly 9.9, and last week a couple of nights thrilled to hit 10s for first time.
When I first started the Therapy my pressure was only 8 and leaks were less of a problem. But now with my pressures quite a bit higher I do find leaks are a challenge - especially as they can vary dramatically from night to night - even using the same mask.
Have a few Masks but find Philips WISP - with mouth tape and Caldera Releaf neck support - Ok. I like the Resmed N20 - first night was fantastic - barely any leaks. But the next two nights with it were awful - leaks, one night being the highest ever. Could not figure that out at all.
Look forward to hearing your valued opinions
PS I also tried the Vcom a while back and not sure I have the courage to want to try it again as it was not a good experience
I'd like some guidance on if it would be an idea for me to narrow my current pressure range further please.
My 95% pressure is fairly stable at around 13.5
Machine and settings:-
ResMed 10 Autoset
Min pressure 10.6
Max pressure 15
EPR 2 full time
Could it be an idea for me to up my minimum pressure to 11 - or even a bit higher?
If so, is it safe to increase the Min pressure up a whole point in one go?
BACKGROUND
Severe OSA
Improvements to my therapy have been gradual but over 90 days of use with machine am seeing reasonable results now.
AHIs - usually under 1
SATs sometimes 9.8, mainly 9.9, and last week a couple of nights thrilled to hit 10s for first time.
When I first started the Therapy my pressure was only 8 and leaks were less of a problem. But now with my pressures quite a bit higher I do find leaks are a challenge - especially as they can vary dramatically from night to night - even using the same mask.
Have a few Masks but find Philips WISP - with mouth tape and Caldera Releaf neck support - Ok. I like the Resmed N20 - first night was fantastic - barely any leaks. But the next two nights with it were awful - leaks, one night being the highest ever. Could not figure that out at all.
Look forward to hearing your valued opinions
PS I also tried the Vcom a while back and not sure I have the courage to want to try it again as it was not a good experience