AirSense10AutoSet & AmaraView mismatch?

[zonk]

Yes, but for the machine to know the vent rate, it has a table in firmware for vent rate versus pressure. And, it has one for each mask type.

excuse me, I get confused with numbers

Amara view mask vents at 12 about 35 L/m
ResMed full face mask at 12 about 41 L/m

ResMed nasal mask at 12 about 34 L/m
ResMed nasal pillows mask at 12 about 37 L/m

Maybe select mask type ... Nasal, as its the closest to Amara view vents leak rate

[justMongo]

excuse me, I get confused with numbers

Amara view mask vents at 12 about 35 50 L/m
ResMed full face mask at 12 about 41 L/m

ResMed nasal mask at 12 about 34 L/m
ResMed nasal pillows mask at 12 about 37 L/m

Maybe select mask type ... Nasal, as its the closest to Amara view vents leak rate Won't work because Amara View vents at 50 LPM @ pressure =12.

[zonk]

Phillips Respironics has a .pdf giving intentional leak rates for different masks but I'm not allowed to post links here yet. If I understood it correctly I think they estimate about 28L/min for the Amara View mask.

Do you mind copy intentional leak rates at different pressures from the pdf, thanks

I've an old pdf download shows intentional leak rates for different masks, including Amara which shows 33 L/m at 15
Also, I find Philips Respironics pdf from Supplier #26 for Amara View, shows 38 L/m at 15

Sorry, justMongo, I'm trying to get to the bottom of it

[justMongo]

Me too. I am looking at the top vent rate graph in my post #4 that shows 50 LPM at pressure = 12.
I'll have to use some Google-fu to see if there is contrary information on the vent rate for the Amara View.

[bazder]

this is the .pdf about Amara View intentional leakage rates

https://www.continuedcare.com/wp-content...-ports.pdf

[zonk]

this is the .pdf about Amara View intentional leakage rates

https://www.continuedcare.com/wp-content...-ports.pdf

Thanks, I updated the old thread, links disappear after a while
http://www.apneaboard.com/forums/Thread-...#pid147166