Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

Help with Optimizing Settings
#11
RE: Help with Optimizing Settings
Today's update: a little frustrating and a move in the wrong direction, but I have to remind myself that there will be better nights and worse nights, and that anything under five is still good. Better to try and focus on the things I can control. One of them is leak rate, which is worse than last night's. I'm going to double check all my hoses tonight and reseal my straps...

Anyone else use an F20? Or is there a better full face mask someone would recommend? I like the full masks because I'm a mouth breather at night.


Attached Files Thumbnail(s)
   
Post Reply Post Reply
#12
RE: Help with Optimizing Settings
Oops I did forget to provide the link.  Here it is.  Hmm.  Sorry, I can't get this board to take the address, so I'll spell it out on different lines, and you can put them together and search for the site:

https://www
a DME-owned forum .com/
CPAP-Sleep-Apnea-Forum.html

I copied the three lines as one thing and tried it  It works!  Smile

P.S. Your leak rate is nice and low. Don't even worry about it.
Machine:  ResMed AirCurve 10 Vauto
Mask:  Bleep DreamPort Sleep Solution
Post Reply Post Reply
#13
RE: Help with Optimizing Settings
Okay, I'll try that link out. Thank you so much! And I'll try not to worry about my leak rate, haha. Last night was better than the night before. As much as I'd like to chase the almighty <1 AHI, I have to remind myself that less than 5 is good, especially given that 15 is what I started with, and that my numbers will get better as the centrals disappear.


Attached Files Thumbnail(s)
   
Post Reply Post Reply
#14
RE: Help with Optimizing Settings
Last night's results. Again, I think this number is being skewed by the fact that I definitely remember waking up (or at least, half waking up) before my alarm went off. So I suspect the numbers after 5AM are possibly indicative of some sleep wake junk. It's a hard habit to break, but just a sign that I really need to get out of bed when I wake up, regardless of when my alarm goes off.


Attached Files Thumbnail(s)
   
Post Reply Post Reply
#15
RE: Help with Optimizing Settings
No results from last night. I was doing another at-home sleep test-- this time, for my pulmonologist. It'll be interesting to see how the data compares to CPAP treatment. I definitely had a harder time getting to sleep last night; I was nervous about not having my CPAP. I'm struggling with anxiety right now and that didn't help one bit, but I made it through the night Cool 

See y'all tomorrow!
Post Reply Post Reply
#16
RE: Help with Optimizing Settings
No results from Thursday because I forgot to put the SD card in! Annoyed-and-disappointed Which really stinks because the machine showed that night as being .6 AHI, my lowest yet! But Friday night was very good, too. I don't even want to say anything more about the results because I'm afraid I'll jinx it! Just look for yourselves and you can see the changes from previous nights.


Attached Files Thumbnail(s)
   
Post Reply Post Reply
#17
RE: Help with Optimizing Settings
Well, it looks like I jinxed it...I tried narrowing down my range/adjusting EPR to see if I could reduce some of the events. Not only did that clearly not work, I had some massive leak rates last night for some reason, and I can't figure out why it jumped up at 1:22 AM. Although interestingly enough, that jump in leak rate coincided with a (temporary) stop in events...


Attached Files Thumbnail(s)
           
Post Reply Post Reply
#18
RE: Help with Optimizing Settings
Back again to report on my last three days. 1.2 AHI is a pretty good number to have consistently. I think I must be very sensitive to changes in pressure. Perhaps if I slowly (say, by .2cm every few days) raise the minimum and lower the maximum pressure, I can eliminate some of these events and get it down? Would anyone like to weigh in?


Attached Files Thumbnail(s)
           
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Help optimizing CPAP machine settings VikingFan2408 12 359 Yesterday, 09:48 AM
Last Post: G. Szabo
  Help with optimizing therapy GoingUp2JC 1 181 11-15-2024, 12:06 PM
Last Post: staceyburke
  [Treatment] Help optimizing my AHI and sleep quality dahaupt 14 1,013 11-13-2024, 07:55 PM
Last Post: Dormeo
  Interpreting and Optimizing machine Hsiaower 2 347 10-03-2024, 11:02 AM
Last Post: Dormeo
  Help Optimizing CPAP Theraphy jgrimaldo3 2 309 09-15-2024, 11:16 PM
Last Post: staceyburke
  Optimizing CPAP - high pressures adlondon 3 424 09-13-2024, 03:15 PM
Last Post: georgesadam
  Help optimizing CPAP settings mluck94 5 483 08-10-2024, 11:00 AM
Last Post: mluck94


New Posts   Today's Posts


About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.