Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

OviBerger - AC11 Therapy
#1
OviBerger - AC11 Therapy
Thank you for the link. Uploaded the zipped SD of my Resmed VAuto 11

Note:
Just to explain the nonsensical changing values , even during night .
The machine Ipap, Epap, PS, Ti min/max, Trigger, values are all over the place since I have the machine - less than 5 days.
I am trying to go systematically about.
Fed up with 10 years of weight gain and daily headaches and fatigue on 2 VAuto 10's that trusted the DME/dr/psy/sleep hospital to help me with.

Extra note from a deluded believer in quality of healthcare and trusting the ordained "Ezperts" within the system's business model.
Can you please point me where to properly start the self titration/ machine fit jouney ?
Also, I do have access (medical research, figure that) to paywalled articles, and clinical literature. Is there a need for tht ?

I just realized after 10 years and 50 kgs more ( that made me a hypoxic obese BMI39) that I shall not really rely on automation or series of poor studies.
The night hiatuses (1-3 hours) are the reason I was miserable in the last years (got even on anti-orexin - lamborexant by the shrink).
I used obviously low pressures and I am not sure even if would need one with back-up rate (I can't go over 15 - functional asthma).
Post Reply Post Reply
#2
RE: VAuto 11 Resmed SD card zip for developers. Where to upload?
Generally, to obtain a starting point, I would set the AC11 to VAuto, a minimum of 4, maximum of 20, and a PS of 3.  All other parameters set to factory defaults.  Use this for one night and post your data.  It should display the pressure range most suited for you and what type of events you are experiencing.  A 3-minute zoom of the Flow Rate, in a non-event area, will provide a picture of your waveform.  This will provide guidance as to the pressure differential required (PS value).

Side Note: Since this is progressing into a therapy thread, I will be splitting out your last post, as well as mine, into its own thread in the Main Forum. I will name the thread, OviBerger - AC11 Therapy. We will use this thread for all your post regarding your therapy.

- Red
Crimson Nape
Apnea Board Moderator
Project Manager for OSCAR - Open Source CPAP Analysis Reporter
www.ApneaBoard.com
___________________________________
Useful Links -or- When All Else Fails:
The Guide to Understanding OSCAR
OSCAR Chart Organization
Attaching Images and Files on Apnea Board
Apnea Helpful Tips

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#3
RE: OviBerger - AC11 Therapy
Thank you,
I post images using imgur ?
Post Reply Post Reply
#4
RE: OviBerger - AC11 Therapy
No, put an SD card in the lot on left side of the machine, and use Oscar on your computer to read it. Post a screen shot.

This site uses a standard layout and protocol for Oscar reports. Look above at the links underneath Crimson Nape’s signature.
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  AC11 humidity control setting Shamus54 8 408 11-20-2024, 05:50 AM
Last Post: Shamus54
  Lorrubdb Therapy Thread: Fine-tuning therapy with Oscar Lorrubdb 395 26,651 06-21-2022, 02:44 PM
Last Post: Lorrubdb


New Posts   Today's Posts


About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.