ResScan Detailed vs. Summary Problem
I downloaded and installed ResScan without the drivers and configured it to download the "All Available Data" option, then downloaded data. But on the legend all the data has a "Summary Icon" next to it, and I'm not able to see any of the detailed graphs in the report.
I have a AirSense 10 Cpap. Is the issue with the Cpap unit and what data it is recording to the SD Card, or is it with the ResScan software??
Any help would be greatly appreciated.
Thanks
RE: ResScan Detailed vs. Summary Problem
We need to know the exact model. "AirSense 10" describes about four machines, not all with data capability.
Ed Seedhouse
VA7SDH
Part cow since February 2018.
Trust your mind less and your brain more.
08-26-2015, 06:34 AM
(This post was last modified: 08-26-2015, 06:35 AM by tired as hell.)
RE: ResScan Detailed vs. Summary Problem
The unit is a "ResMed Airsense 10 CPAP".... At least that is what it says on the front of it. I think it is the most basic unit and not an "Autoset" It was about $800.00 if that helps.
Thanks
RE: ResScan Detailed vs. Summary Problem
Unfortunately the S10 CPAP does not record detailed data, just the basics. If at all possible, see if you can exchange your machine for an S10 Elite or (preferably) an S10 Autoset.
RE: ResScan Detailed vs. Summary Problem
(08-26-2015, 06:34 AM)tired as hell Wrote: The unit is a "ResMed Airsense 10 CPAP".... At least that is what it says on the front of it. I think it is the most basic unit and not an "Autoset" It was about $800.00 if that helps.
Thanks
I would get the machine replaced with the 'AutoSet', even if have to loose some money on the exchange
Supplier #2, have the 'AirSesnse 10 AutoSet' include the heated tube $825.00, and $789.00 without the heated tube
Talk to them, they might do a deal with you
RE: ResScan Detailed vs. Summary Problem
Good news, The DME swapped out the Cpap for an Auto at no charge. Now that is what I call Customer Service!!! Is there a post that I can follow for how to use the resscan software and how to interpret all those squiggly lines??
RE: ResScan Detailed vs. Summary Problem
(09-23-2015, 09:15 PM)tired as hell Wrote: Is there a post that I can follow for how to use the resscan software and how to interpret all those squiggly lines??
Congrats on the auto machine!
Here's some links to get you started:
Go to the bottom of this page and there's a short video on ResScan:
http://www.apneaboard.com/resmed-airsens...setup-info
For a more detailed
ResScan video, go here:
http://apneaboard.com/resscan.htm
ResScan Report Interpretation Guide PDF here:
http://www.apneaboard.com/ResScan_Interp...-Guide.pdf
Also, if you need the Clinician Setup Manual for your AirSense 10 machine, it can be sent out via email. Just follow the instructions in Section Three of this page:
http://www.apneaboard.com/adjust-cpap-pr...tup-manual.
You may also want to try out the
SleepyHead software package (free) here:
http://www.sleepfiles.com/SH2/
A pretty good SleepyHead Guide can be found here:
http://www.apneaboard.com/wiki/index.php...SleepyHead
SuperSleeper
Apnea Board Administrator
www.ApneaBoard.com
INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
