[Equipment] ResMed 10 just quit working mid nap!! Anyone had this happen? Please any help,apprec!

[Ulong]

[OpalRose]

Try unplugging the unit, wait 10 minutes, then plug back in.

If that doesn't work, then you may have to return it. Is it still under warranty?

[Ulong]

Already tried that!! Literally was using C-Pap and felt like I was suffocating, then realized machine, was no longer running!! Didn't notice any light on the transformer,or whatever that block is,like some have suuggested!!!! Yes should still be covered,under two years!!

[sonicboom]

Another possibility:

Make sure you don't have an issue with the outlet it was plugged in to. Sometimes circuits shut off and have to be reset. Try plugging your unit in elsewhere and see if the AC adapter lights up. If it doesn't then that's likely your problem. If it does your problem maybe the outlet it was plugged into. Plug something else in it to test it.

[trish6hundred]

Hi Ulong,
WELCOME! to the forum.!
You should return it and get it exchanged.
good luck with getting a different machine and also with your CPAP therapy.

[Ulong]

Have it plugged into power strip,nothing else not working on strip! Even plugged it into three different outlets,still nothing!!

[vsheline]

Try a different outlet altogether (an outlet you know still works).

[zonk]

Assume all good with the wall outlet ...
Check that the plug at the back of the machine is fully inserted and the power cord is fully inserted into the power brick
If still not working, ask for a replacement under the new machine warranty, preferable the Elite model or even better an AutoSet which can works in either fixed pressure or auto modes and better value machine for just few dollars more

[Sleeprider]

The most common item to fail on a CPAP is the AC adapter "brick". It is also the lowest cost item to replace. The Resmed power adapter is unique to that machine, and must be replaced by a Resmed brand adapter for the Airsense 10. Talk to your DME supplier, or look online. If you have to pay for replacement, the cost is $64 from Supplier #1. Search for External 90 Watt Power Supply for ResMed AirSense™ 10 and AirCurve™ 10 Series CPAP and BiPAP Machines