Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.
Login or Create an Account
I just changed from A Dreamstation 2 to Airsense 11 Autoset. I thought I would have to start over with my Flashair card. I popped it in my A11 expecting it to reformat the card. and it was just accepted as is. I looked at the card in my computer, and as far as I know, all looked good. See attached for file structure of downloaded data. All subdirectories are empty, but P1, and LAST.TEXT points to 74FAE104.
I created a new profile in Oscar. Used the machine for the first time last night. This morning, I ran FlashPAP. It had some trouble finding the card, but without making any changes connected. FlashPAP listed all files as new. I just selected last night and it seemed to copy. I switched to my new profile in Oscar and imported the data. Nothing shows up. I remember reading that you need a couple days of data initially. Would that apply in this case of switching machines, or do I have a problem?
First, you should have erased all the data on the FlashAir.
Something you didn't mention; Did you change the machine type declaration in FlashPAP? You need to change the following line in your FlashPAP user file (*.fpap) to, "CPAPModel=100". That was the declaration for the AS10 series. Since the AS11 was released after the creation of FlashPAP, you may still experience problems. The AS11 uses a different file extension than the prior models that FlashPAP may not recognize.
INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
I did not erase all data on the Flashair card. I changed CPAPModel=100 and get the attached message when copy data is selected. The copy continues, but the message persists. I put the card (attached) in my computer and was able to download the data. Am I SOL as far as the Flashair goes or is there hope?
If the IP, 192.168.1.220, is your FlashAir address, then you should be able to view it in your web browser. You can also ping the address to see if it will respond. The P-Series directory is for the Philips. Delete it. The FlashAir only announces itself to the network at boot-up. This means that if your network access point was initialized after the FlashAir, it will not be seen. You need to bring up the FlashAir as the last device powered up. Additionally, If you edited the FlashAir's SD_WLAN/CONFIG file, you will need to replace the asterisks ("*") with the actual password for your Wi-Fi. Otherwise, it will try to use the asterisks as the actual password.
Here is a copy of my A10.fpap configuration file. I have modified the IP to reflect your IP.
INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
I deleted P-SERIES. My SDcard is attached and expanded. From FlashPAP, I click "Scan FlashAir SD card", attached. Then click "Copy xPAP data for selected dates", I select 2024-02-21. Then I get the message (attached). Clicking OK does not work. I have to cmd-Q out.
From a terminal window, what is the response from the command, "ping -c3 192.168.1.220"?
You should get something like either:
64 bytes from 192.168.1.220: icmp_seq=1 ttl=255 time=0.763 ms ⇽ Good! FlashAIr is live and on the network
- or -
From 192.168.1."your computer's IP" icmp_seq=1 Destination Host Unreachable ⇽ Bad! The FlashAir is either not at this address or not connected to the network.
INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
peterream@Peters-MacBook-Air ~ % ping -c3 192.168.1.220 PING 192.168.1.220 (192.168.1.220): 56 data bytes 64 bytes from 192.168.1.220: icmp_seq=0 ttl=255 time=70.792 ms 64 bytes from 192.168.1.220: icmp_seq=1 ttl=255 time=10.494 ms 64 bytes from 192.168.1.220: icmp_seq=2 ttl=255 time=6.646 ms
I know can reach the FlashAir card. I can see it from browser at 192.168.1.220, FlashPAP finds it, and Sleepmaster finds it. Sleepmaster created me a folder at ~/Documents/Peter_AS10. Data looks good there. Oscar imported the data. If I point FlashPAP destination to this folder, it seems to all work, but I get the unrecoverable error message. I'll try it in the morning. I can live with FlashPAP with the error if the data indeed gets downloaded or Sleepmaster with no errors with both assuming AS10. I'll see tomorrow.
Thanks for your help. If you have any other ideas, I am open to try. Otherwise, I'll let you tomorrow.
It appears my FlashAir card in the A11 loses connection. Sometimes I can access the card from my browser (192.168.1.220) and other times not. If I ping it 100 times, I get:
Request timeout for icmp_seq 81 64 bytes from 192.168.1.220: icmp_seq=82 ttl=255 time=13.170 ms Request timeout for icmp_seq 83 64 bytes from 192.168.1.220: icmp_seq=84 ttl=255 time=12.859 ms 64 bytes from 192.168.1.220: icmp_seq=85 ttl=255 time=7.731 ms 64 bytes from 192.168.1.220: icmp_seq=86 ttl=255 time=11.503 ms 64 bytes from 192.168.1.220: icmp_seq=87 ttl=255 time=14.018 ms 64 bytes from 192.168.1.220: icmp_seq=88 ttl=255 time=3.770 ms 64 bytes from 192.168.1.220: icmp_seq=89 ttl=255 time=12.976 ms Request timeout for icmp_seq 90 64 bytes from 192.168.1.220: icmp_seq=91 ttl=255 time=7.598 ms 64 bytes from 192.168.1.220: icmp_seq=92 ttl=255 time=7.522 ms 64 bytes from 192.168.1.220: icmp_seq=93 ttl=255 time=12.309 ms 64 bytes from 192.168.1.220: icmp_seq=94 ttl=255 time=13.019 ms 64 bytes from 192.168.1.220: icmp_seq=95 ttl=255 time=17.660 ms 64 bytes from 192.168.1.220: icmp_seq=96 ttl=255 time=11.856 ms 64 bytes from 192.168.1.220: icmp_seq=97 ttl=255 time=11.216 ms 64 bytes from 192.168.1.220: icmp_seq=98 ttl=255 time=13.204 ms 64 bytes from 192.168.1.220: icmp_seq=99 ttl=255 time=12.684 ms
--- 192.168.1.220 ping statistics --- 100 packets transmitted, 33 packets received, 67.0% packet loss round-trip min/avg/max/stddev = 3.770/11.916/20.660/4.250 ms
It appears my FlashAir card is going to sleep. I can access in the morning. Later in the day, I can no longer access. I can regain access by ejecting the card and re-inserting. My DS II had the same problem, but only after many days of inactivity. Any ideas?
