Help with data

[andersgeorgsson]

Did you import the whole P folder into Sleepyhead?

I pointed it to the root of the SD card in which the "P-series" was the only folder/file.

Any other folder gives "Import Problem"..

[Bobmac27]

I am new to CPAP and the Sleepy Head software but you seem to be doing everything correct. It would seem that the machine is not recording.

[Sleepster]

I pointed it to the root of the SD card in which the "P-series" was the only folder/file.

Unfortunately, SleepyHead does this on very rare occasions. (It is a beta release!)

Put the card back in your CPAP machine. Wait for the normal display to appear on the screen. Re-boot the CPAP. This probably won't work, but it's worth a try.

Chances are, tomorrow you will be able to see the data. Meanwhile, you can look at the machine's on-screen display. On the "Info" menu you can see the AHI, percent time spent in large leak, and percent time spent in periodic breathing.

Look for a PM from me.

[andersgeorgsson]

I pointed it to the root of the SD card in which the "P-series" was the only folder/file.

Unfortunately, SleepyHead does this on very rare occasions. (It is a beta release!)

Put the card back in your CPAP machine. Wait for the normal display to appear on the screen. Re-boot the CPAP. This probably won't work, but it's worth a try.

Chances are, tomorrow you will be able to see the data. Meanwhile, you can look at the machine's on-screen display. On the "Info" menu you can see the AHI, percent time spent in large leak, and percent time spent in periodic breathing.

Look for a PM from me.

I now remember seeing that my machine is running software version 3.0 - is this what everyone else uses? Just kind of curious

I looked a couple of the files, kind of cool they use "Unix Timestamp" for their date/time..

One thing that I noticed is that sleepyhead was able to read machine and serial number, but not time/date of first/last use...

What you suggested in the PM didn't work...
It says that it can't read and to contact tech support...

[archangle]

I got my machine yesterday - went to bed around 9.30pm and slept with it on all of the night (except a few wake ups),
when I look in the "P-series" folder - there is data from the System One Auto machine I have - but when I import into
sleepy head - I can see my machine serial - but it says no cpap data imported. What could I be doing wrong?

F:\ is my SD-Card reader slot - and that is where I am importing from... (Windows 7, 64bit by the way)

Any help is appreciated

You have the PRS1 Model 60 Auto. (560P) SleepyHead doesn't work with that yet.

The author of SleepyHead is dealing with some other issues and hasn't updated the software yet.

[Sleepster]

You have the PRS1 Model 60 Auto. (560P) SleepyHead doesn't work with that yet.

The author of SleepyHead is dealing with some other issues and hasn't updated the software yet.

Ouch! So, what's the model number of the older PRS1 Auto that does work with SleepyHead?

[zonk]

The author of SleepyHead is dealing with some other issues and hasn't updated the software yet.

Ouch! So, what's the model number of the older PRS1 Auto that does work with SleepyHead?

SleepyHead support all PRS1 machines and don,t support the older models or the newer P60 series

[Sleepster]

You have the PRS1 Model 60 Auto. (560P) SleepyHead doesn't work with that yet.

The author of SleepyHead is dealing with some other issues and hasn't updated the software yet.

Ouch! So, what's the model number of the older PRS1 Auto that does work with SleepyHead?

I think it's the model 550P.

Zonk, I think SleepyHead supports all PRS1 machines except the 560P.

[zonk]

Zonk, I think SleepyHead supports all PRS1 machines except the 560P.

Its what i said SH don,t support P60 series which is 560P...Right or ?

[Sleepster]

Its what i said SH don,t support P60 series which is 560P...Right or ?

Yes, but it is a PRS1.