Is this image of SH the correct way to post on forums? Also, how am I doing?!

[vroomvroom]

You can also drop the mask pressure graph and add in flow limitations although I don’t expect to see much worth worrying about

Done!

[DeepBreathing]

Looking better all the time.  However it's a bit small on my screen - hard to read the actual numbers. If you drop the [img] [/img] tags and just have the address of the image file we can click on that and see a higher resolution version.

[Sleeprider]

As for the image, if you get rid of the calendar (click the little triangle next to the day Fri) and lose the pie chart, then the machine settings and additional diagnostics will show up. You can turn off the pie chart by going to File | Preferences | Appearance . I'd leave the event flags on - if / when you do get events it's good to see how they are spaced through the night and how they relate to pressure, leaks etc.

If the menus aren't responding, you might be in full screen mode. Press F11 to toggle in or out of that mode.

It shouldn't be a problem with your A10, but some external card readers don't recognise the lock on the SD card, which leads to problems with older machines like my S9.

What do you guys think of this image? 

Chart looks great. We can see how pressure responds directly to the flow limitations, and now all of your settings and respiratory statistics are visible.  I will stick with my previous recommendation to increase minimum and maximum pressure slightly.  Plese reduce that 40 minute ramp time to Auto or off. Your therapy looks great.

[vroomvroom]

As for the image, if you get rid of the calendar (click the little triangle next to the day Fri) and lose the pie chart, then the machine settings and additional diagnostics will show up. You can turn off the pie chart by going to File | Preferences | Appearance . I'd leave the event flags on - if / when you do get events it's good to see how they are spaced through the night and how they relate to pressure, leaks etc.

If the menus aren't responding, you might be in full screen mode. Press F11 to toggle in or out of that mode.

It shouldn't be a problem with your A10, but some external card readers don't recognise the lock on the SD card, which leads to problems with older machines like my S9.

What do you guys think of this image? 

Chart looks great. We can see how pressure responds directly to the flow limitations, and now all of your settings and respiratory statistics are visible.  I will stick with my previous recommendation to increase minimum and maximum pressure slightly.  Plese reduce that 40 minute ramp time to Auto or off. Your therapy looks great.

Thanks! I bumped last night to no ramp, and 7-11 pressure as suggested. 

I put in the SD card and updated SD with my daily info, but it's only showing 30 min of treatment last night. Not sure why it's doing that. I even woke up before noon today.

I changed the time zone settings in SH to eastern so I get 3 hours of wiggle room. Do I need to change the CPAP's time zone in clinician's menu as well to match?

[Sleeprider]

FWIW, I have not changed my CPAP time. Your choice whether you do or don't.

[vroomvroom]

FWIW, I have not changed my CPAP time. Your choice whether you do or don't.

OK, I will just change the time in SH so it hopefully keeps the graph and times together for the days I wake up after 12pm. I'll leave it as-is on the machine itself.

[vroomvroom]

Chart looks great. We can see how pressure responds directly to the flow limitations, and now all of your settings and respiratory statistics are visible.  I will stick with my previous recommendation to increase minimum and maximum pressure slightly.  Plese reduce that 40 minute ramp time to Auto or off. Your therapy looks great.

I have an update! 

https://imgur.com/w1SIPl3



And here's another one: 

https://imgur.com/xb9q9e5



I eliminated ramp, and changed pressure to 7-11 like you said. EPR is set to 3.

Anything else I should be tweaking?

[Sleeprider]

Looks perfect! The machine is responding to the flow limitations and quickly rising to about 9.0 cm. I could see a range of 8.0 to 12.0 pressure with EPR 3, but you have better therapy results than I do, so it's entirely a matter of what is comfortable for you.

[vroomvroom]

Looks perfect! The machine is responding to the flow limitations and quickly rising to about 9.0 cm. I could see a range of 8.0 to 12.0 pressure with EPR 3, but you have better therapy results than I do, so it's entirely a matter of what is comfortable for you.

I bumped it up to 8-12 like you mentioned! What do you think? https://i.imgur.com/4uwOOTa.png

[Sleeprider]

Of course the real question is, what do you think? You have to be comfortable with the therapy. In this case you have a stable pressure that is able to treat all events and has room to move either up or down.