Has anyone experimented with ways to expand the tank capacity?
"I drank WHAT?" - Socrates
Hello Guest,
Welcome to Apnea Board !
Larger Water Tank for Airsense 10
|
11-08-2021, 10:14 PM
Larger Water Tank for Airsense 10
I find that I am running out of water well before the end of night.
Has anyone experimented with ways to expand the tank capacity?
Brian
"I drank WHAT?" - Socrates
11-09-2021, 06:44 AM
RE: Larger Water Tank for Airsense 10
How about using an external room humidifier, like one of those ultrasonic ("cool air") units ? If the room air is humidified a little to start, the cpap can add what it needs without emptying the tank so quickly.
11-09-2021, 02:43 PM
RE: Larger Water Tank for Airsense 10
I have not had that problem yet, but I bought a spare tank so that when it gets really cold and the heat runs all night long I can have the tank filled up and on the bedside table and swap them out if I run out of water.
11-09-2021, 04:27 PM
RE: Larger Water Tank for Airsense 10
(11-09-2021, 02:43 PM)Superstar Wrote: I have not had that problem yet, but I bought a spare tank so that when it gets really cold and the heat runs all night long I can have the tank filled up and on the bedside table and swap them out if I run out of water. Other than a stand-alone humidifier unit, that sounds like the best solution.
12-07-2021, 10:31 AM
RE: Larger Water Tank for Airsense 10
I have (2) ResMed AutoSense 10 AutoSet CPAP machines
One the VA provided to me in November Serial # 232126***** made in Jul 2021 One I bought on Facebook Marketplace with 0 hours for $200.00 Serial # 232019***** made in May 2020 Both units have different water chambers: The VA provided machine has this tank: on the left is part number 37299 The Facebook purchased machine has this tank: on the right is part number 37479 The tank on the left (37299) generally uses 1/2 the water in 8 hours The tank on the right (37478) generally uses all the water in 8 hours On the box (37478) from the VA it says cleanable On a website (37478) states that the tank on the right is dishwater safe As you can see the tank on the right has a larger metal surface contacting the heating source, so therefore I assume that is why it uses more water I hope this can help someone with a ResMed 10 that is using all the water!!!
12-09-2021, 02:05 AM
RE: Larger Water Tank for Airsense 10
That's great sleuthing, Jarhead! I'll definitely keep that in mind next time I'm getting a humidifier tub for my ResMed!!
Usually I use my DreamStation, and I'm not aware of any different tub than the 1 tub for it. |
« Next Oldest | Next Newest »
|
Possibly Related Threads... | |||||
Thread | Author | Replies | Views | Last Post | |
Water In Face | JSL747 | 13 | 510 |
11-23-2024, 07:05 PM Last Post: JSL747 |
|
[Equipment] Higher AHI Readings on AirSense 11 than AirSense 10 | Bmck8381 | 3 | 442 |
11-20-2024, 11:49 AM Last Post: G. Szabo |
|
Water in the tube after adding water tthe humidifier reservoir beyond a certain point | drago7579 | 8 | 355 |
11-18-2024, 06:44 PM Last Post: SarcasticDave94 |
|
Small Debris in Water Chamber? | Reesche | 6 | 371 |
11-04-2024, 12:10 PM Last Post: G. Szabo |
|
Resmed airsense 11 water tank | super7pilot | 9 | 663 |
10-23-2024, 11:17 AM Last Post: super7pilot |
|
Larger reservoir for Air Sense 10 Autoset | RonKMiller | 33 | 25,430 |
10-12-2024, 07:07 AM Last Post: Nosludhe |
|
Resmed 11 Water Chamber | cyburns1 | 10 | 2,067 |
09-26-2024, 07:06 PM Last Post: Tampa Jim |