Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

Long time cpap'r with new machine - confused.
#1
Long time cpap'r with new machine - confused.
My history:  Diagnosed via sleep study in 2003.  Had a 90.  Been using a ResMed S7 cpap ever since.  Did mess with the setting and increase the flow a few years back.  Believe the original was set a 11 and I blindly bumped it up to, I think, 16 maybe 17.  

My original cpap started failing so I contacted the prescribing physician to see about getting a new machine.  It had been so long, I was no longer in their system.  They would not write a prescription without me coming back in (understandable).  Appointments were about two months out.  Would probably have to go through another sleep study.  Probably the best way to proceed but I didn't want to go through the aggravation, time and process to get a machine.   

Looked around and boy the machines have changed.  I opted to acquire a Resmed Airsense 10 Autoset on my own and downloaded Sleepyhead software.  I've had it for two nights with the following setup:

Machine Settings
Mode APAP
Minimum Therapy Pressure 7.00 cmH2O
Maximum Therapy Pressure 20.00 cmH2O
Antibacterial Filter No
Climate Control Manual
Exhale Pressure Relief Off
Humidifier Enabled Status On
Humidity Level 2
Mask Setting Nasal
Patient Access Yes
Ramp Enable Off
Machine auto starts by breathing Off
ClimateLine Temperature 27 ºC
ClimateLine Temperature Enable 2

Downloaded My first two nights of data (below) and have no idea what I'm looking at but they don't look too good based on the Hypopnea reading dominating the pie chart (whatever that means).

AHI - 1.65
Large Leak 0.81%
Clear Airway 0.22
Obstructive 0.11
Unclassified Apnea 0.11
Hypopnea 1.21
RERA 0.11


AHI - 1.79
Large Leak 0.60%
Clear Airway 0.00
Obstructive 0.22
Unclassified Apnea 0.00
Hypopnea 1.57
RERA 0.22

Need to be educated because as I prefer to get this set up on my own.  Is there a good document to help interpret Sleepyhead data, to read up on what all this means and what I need to adjust?  Or maybe point me in the right direction.   Dont-know
 
Thanks for any info.
Post Reply Post Reply
#2
RE: Long time cpap'r with new machine - confused.
Actually, your numbers are pretty decent.  A slight pressure increase would take care of the hypopneas.  You can raise it to 7.5 and see if that makes a difference.

What is the 90% pressure reading on #SleepyHead?
Try to set your pressure range to 2cm below and 2cm above that number.

Here is a link to help with SleepyHead.
http://www.apneaboard.com/wiki/index.php...SleepyHead

Also notice you have large leaks. This could be from your mask or mouth breathing.

Once you get a couple more posts (you need 4), follow the tutorials in my signature line to post a screenshot here.
OpalRose
Apnea Board Administrator
www.apneaboard.com

_______________________
OSCAR Chart Organization
How to Attach Images and Files.
OSCAR - The Guide
Soft Cervical Collar
Optimizing therapy
OSCAR supported machines
Mask Primer



INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE.  ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA.  INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#3
RE: Long time cpap'r with new machine - confused.
aucivil, once you have 4 posts you will be able to post screenshots of your therapy data. The links in my signature below this post describe how to organize charts and post the data. As Rose said, an AHI less than 2 with predominately hypopnea is very good, and can probably be fully resolved with a bump in minimum pressure. We often recommend within 2 cm of the 90% pressure, but setting it equal to your median or average after a few nights should work fine for the Autoset.

Good luck.
Sleeprider
Apnea Board Moderator
www.ApneaBoard.com

____________________________________________
Download OSCAR Software
Soft Cervical Collar
Optimizing Therapy
Organize your OSCAR Charts
Attaching Files
Mask Primer
How To Deal With Equipment Supplier


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#4
RE: Long time cpap'r with new machine - confused.
(03-05-2017, 08:47 AM)OpalRose Wrote: What is the 90% pressure reading on sleepyhead
Try to set your pressure range to 2cm below and 2cm above that number.

Is this what you are talking about?

From statistics box

Pressure   Min     Med     95%     Max
Day 1       6.00    11.88   17.88    19.66
Day 2       6.00    11.48   16.64    18.56
Post Reply Post Reply
#5
RE: Long time cpap'r with new machine - confused.
(03-05-2017, 09:04 AM)aucivil Wrote:
(03-05-2017, 08:47 AM)OpalRose Wrote: What is the 90% pressure reading on sleepyhead
Try to set your pressure range to 2cm below and 2cm above that number.

Is this what you are talking about?

From statistics box

Pressure   Min     Med     95%     Max
Day 1       6.00    11.88   17.88    19.66
Day 2       6.00    11.48   16.64    18.56


Yes, that's what I was talking about.  Wow, I'm surprised that you have such good results with such a wide pressure range.  

Definitely need to adjust the minimum pressure.  Being that your 95% reading is higher than I thought it would be, I would go with SleepRiders advice and set closer to Median pressure.  Try a range of minimum 11 or 12 and max setting left at 20.

It will be interesting to see your graphs when you are able to post.  I'd hate to see your max pressure bumping up close to 20 for any length of time.  Sometime when folk have to use higher pressures, it may be a good idea to talk to your doctor about a bipap machine so that you are more comfortable.
OpalRose
Apnea Board Administrator
www.apneaboard.com

_______________________
OSCAR Chart Organization
How to Attach Images and Files.
OSCAR - The Guide
Soft Cervical Collar
Optimizing therapy
OSCAR supported machines
Mask Primer



INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE.  ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA.  INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#6
RE: Long time cpap'r with new machine - confused.
(03-05-2017, 09:14 AM)OpalRose Wrote: Sometime when folk have to use higher pressures, it may be a good idea to talk to your doctor about a bipap machine so that you are more comfortable.

That'd be some bad luck.  I just bought this machine - would hate to have to buy another so soon.

(03-05-2017, 09:00 AM)Sleeprider Wrote: aucivil, once you have 4 posts you will be able to post screenshots of your therapy data.  The links in my signature below this post describe how to organize charts and post the data.   As Rose said, an AHI less than 2 with predominately hypopnea is very good, and can probably be fully resolved with a bump in minimum pressure.  We often recommend within 2 cm of the 90% pressure, but setting it equal to your median or average after a few nights should work fine for the Autoset.  

Good luck.

Thanks
Post Reply Post Reply
#7
RE: Long time cpap'r with new machine - confused.
I will post the screenshots asap
Post Reply Post Reply
#8
RE: Long time cpap'r with new machine - confused.
(03-05-2017, 08:47 AM)OpalRose Wrote: Once you get a couple more posts (you need 4), follow the tutorials in my signature line to post a screenshot here.

It list me as having 4 post but when I try to post the screenshots it says I need 4 post before I can post images.  I'll try after this post.
Post Reply Post Reply
#9
RE: Long time cpap'r with new machine - confused.

[Image: screenshot-20170305-084848-XL.png]

[Image: screenshot-20170305-083555-XL.png]
Post Reply Post Reply
#10
RE: Long time cpap'r with new machine - confused.
Looks great so far, and I'll stick with my recommendation for a minimum pressure at 11.0. You are not using EPR, and I think it's best to stick to one change at a time. So after getting established at the higher minimum pressure, you might want to try EPR (exhale pressure relief). I think it makes CPAP treatment much more comfortable as it gives 1-3 cm pressure relief during exhale, and makes your machine a bilevel limited to 3 cm pressure support. FWIW, I usually have AHI less than 1, but have had a number of 1.4-1.8 this week. Point being, you're doing fine.

On the charts, you're nearly perfect, but trade the mask pressure for flow limitation.
Sleeprider
Apnea Board Moderator
www.ApneaBoard.com

____________________________________________
Download OSCAR Software
Soft Cervical Collar
Optimizing Therapy
Organize your OSCAR Charts
Attaching Files
Mask Primer
How To Deal With Equipment Supplier


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Buying CPAP machine for non United States resident ivan007 7 681 Yesterday, 06:47 AM
Last Post: Hmm888
  First time poster - Advice Lukeh84 21 419 Yesterday, 03:35 AM
Last Post: Lukeh84
Ohmy [Pressure] My CPAP machine Jill Doe 2 165 12-08-2024, 09:40 PM
Last Post: Sleeprider
  TIME OF OSCAR Pablo1985 4 184 12-07-2024, 04:51 PM
Last Post: OpalRose
  Good long sleep last night super7pilot 1 140 12-04-2024, 05:15 PM
Last Post: Deborah K.
  how high was your AHI/RDI and how long did it take for you to sleep with CPAP? mugen4u 6 242 12-03-2024, 06:32 PM
Last Post: Gary1of2
  Day 1 using the BMC G3A20 CPAP machine I got from my brother. liuzilong 0 137 11-28-2024, 10:11 PM
Last Post: liuzilong


New Posts   Today's Posts


About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.