Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

New BiPAP User - Assistance with Settings
#11
RE: New BiPAP User - Assistance with Settings
For mouth tape to work, you need to use good-quality tape cut to the right size. Lots of people here use Cover Roll and Hypafix tapes, both of which work well. I like kinesiology tape better because it is nice and stretchy and conforms better to one's facial contours.

I need 2-inch wide tape cut to 5-1/2 inches long. Any narrower or shorter, and I still leak.
Machine:  ResMed AirCurve 10 Vauto
Mask:  Bleep DreamPort Sleep Solution
Post Reply Post Reply
#12
RE: New BiPAP User - Assistance with Settings
Appreciate your input, Deborah. I'm already using 2" wide Cover Roll stretch tape. I cut it to 4.75" long, but I'll try going a little bit longer to see if that helps at all.
Post Reply Post Reply
#13
RE: New BiPAP User - Assistance with Settings
WW, your last chart shows a significant improvement in leaks. EPAP ranged from 9.0 to just under 11, so this resulted in lower pressure for you without a remarkable increase in events. Your 95% flow limit was zero and tidal volume improved to 400 mL/sec which suggests better volume than any of the three charts you have posted to date. I think this is good progress and increased comfort. The remaining obstructive events are random and probably positional in nature. I'm game to try a lower pressure to see if we can improve your comfort from aerophagia, if you are. If you want to try a lower pressure:
Vauto Mode
EPAP min 8.0
IPAP max 15.0
PS: 4.0
no other changes.
Sleeprider
Apnea Board Moderator
www.ApneaBoard.com

____________________________________________
Download OSCAR Software
Soft Cervical Collar
Optimizing Therapy
Organize your OSCAR Charts
Attaching Files
Mask Primer
How To Deal With Equipment Supplier


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#14
RE: New BiPAP User - Assistance with Settings
I'm game to try whatever you recommend, Sleeprider! I'll let you know how it goes. Thank you. Smile
Post Reply Post Reply
#15
RE: New BiPAP User - Assistance with Settings
(11-21-2024, 01:09 PM)Deborah K. Wrote: For mouth tape to work, you need to use good-quality tape cut to the right size. Lots of people here use Cover Roll and Hypafix tapes, both of which work well. I like kinesiology tape better because it is nice and stretchy and conforms better to one's facial contours.

I need 2-inch wide tape cut to 5-1/2 inches long. Any narrower or shorter, and I still leak.

Deborah, have you ever tried “double tapping” with the kinesiology tape?

Putting two layers of tape. 

For me, I have had less leak this way.

Not zero leak, but less leak ?
Post Reply Post Reply
#16
RE: New BiPAP User - Assistance with Settings
Update after Night 2:
  • Used 2 layers of mouth tape, slightly longer than usual
  • Used a thinner pillow in the first session; developed neck ache and switched to regular thick pillow in the second session
  • Less aerophagia compared to Night 1
  • Moderately bad headache during the night and in the morning
  • Feeling lousy so far the next day


Attached Files Thumbnail(s)
   
Post Reply Post Reply
#17
RE: New BiPAP User - Assistance with Settings
(Yesterday, 07:32 AM)weepingwillow Wrote: Update after Night 2:
  • Used 2 layers of mouth tape, slightly longer than usual
  • Used a thinner pillow in the first session; developed neck ache and switched to regular thick pillow in the second session
  • Less aerophagia compared to Night 1
  • Moderately bad headache during the night and in the morning
  • Feeling lousy so far the next day

Wow!! Almost zero leak!!! like
Post Reply Post Reply
#18
RE: New BiPAP User - Assistance with Settings
Lots of positional obstruction in first session, so a more comfortable pillow position is working better. Let's hold on settings and see how things sort out. I find the comfort on aerophagia encouraging.
Sleeprider
Apnea Board Moderator
www.ApneaBoard.com

____________________________________________
Download OSCAR Software
Soft Cervical Collar
Optimizing Therapy
Organize your OSCAR Charts
Attaching Files
Mask Primer
How To Deal With Equipment Supplier


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Optimization assistance DocButNotSleepDoc 3 185 7 hours ago
Last Post: SarcasticDave94
  [Treatment] somniosus - Therapy Thread [new user looking for initial settings advice] somniosus 2 227 11-21-2024, 02:53 PM
Last Post: somniosus
  [CPAP] jdougc - Therapy Assistance jdougc 57 1,926 11-20-2024, 10:57 AM
Last Post: G. Szabo
  First time user, what settings should I tweak? sleeper build 2 185 11-16-2024, 11:50 AM
Last Post: sleeper build
  [Treatment] New CPAP user, help with settings tleish 7 336 11-10-2024, 06:05 PM
Last Post: tleish
  Another new user settings suggestions thread StromboliCPAP 2 218 11-10-2024, 04:34 PM
Last Post: StromboliCPAP
  New user, one month in, settings advice? Dan9463 14 728 11-10-2024, 02:11 PM
Last Post: Dan9463


New Posts   Today's Posts


About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.