RE: No CA or UA on SleepHead
I have the A10 and I'm running SH v0.9.8.-1 openGL. In this version CSR is reported in event flags even though none are detected as long as the flag for CSR is turned on in the lower left corner of the screen under Flags.
Happy Pappin'
Never Give In, Never Give Up
INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA.
RE: No CA or UA on SleepHead
Sonic,
Have you had any CSR's reported before? My CSR is turned on in both SH 0.9.8.1 and SH 1.0 and is not displayed. That's why I'm guessing it only appears if you have or had an event.
RE: No CA or UA on SleepHead
(10-27-2017, 08:16 AM)Walla Walla Wrote: I know this is the case with the Dreamstation PB will only show up in the events chart if detected.
Probably the same for ResMed.
I also have a Dreamstation (on loan) and VS (vibratory snore) shows up in Event Flags and I've never had one detected. I had a single VS2 detected however so maybe both display if one is detected? Also, with the Airsense 10 i just had a night with no events detected yet all fields are still displayed. Is it possible that once an event is detected, it turns on the Flag and keeps it on going forwards but not before the first event is detected? Seems i should be able to over ride that manually but don't know. What i'm trying to confirm here is if PB or CSR is not showing up, that it means I'm not having these as apposed to there being a problem with the device or with SH that is preventing detection or display of the event. Without seeing an event flag, i don't know how i can be sure.
RE: No CA or UA on SleepHead
Yes, one night, 2 and 1/2 years ago, 10 days after starting therapy. Never again to my knowledge.
Happy Pappin'
Never Give In, Never Give Up
INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA.
RE: No CA or UA on SleepHead
I just went back and looked at my beginning charts on ResMed. The charts show events for the first time after they happen.
Example. No line on chart for CA's the first night. Second night had a CA and line for CA's showed up on the chart after that.
10-27-2017, 11:24 AM
(This post was last modified: 10-27-2017, 11:33 AM by Fixit50.)
RE: No CA or UA on SleepHead
[attachment=3936 Wrote:Crimson Nape pid='229486' dateline='1509108988']Some events will not display unless you need them. I know this applies when using and not using a pulse-ox device. Maybe you need to have CSR events before the CSR label and flag will display. 
What you say sounds very plausible. My SH is ver 1.0.0-beta. I have not had a CSR showing up with either machine and the field is checked but not displayed. I have seen instances that look like they could be CSR (two are attached). The Dreamstation displays the PB Flag and the first night i used it, it did detect 1% PB so maybe that’s why it shows up with the Dreamstation only.
Can anyone say if the attached flow rate should trigger either a CSR or PB event? Looks like it to me unless maybe it needs to persist for a longer time? Also why is the dead space between breathing not detected as an apnea (CA or OA). These are clearly more than 10 seconds!!!
[attachment=3936][attachment=3935]
RE: No CA or UA on SleepHead
(10-27-2017, 11:20 AM)Walla Walla Wrote: I just went back and looked at my beginning charts on ResMed. The charts show events for the first time after they happen.
Example. No line on chart for CA's the first night. Second night had a CA and line for CA's showed up on the chart after that.
Sure looks like that's what's going on. Thanks for checking!!
