Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

ASV Settings
#1
ASV Settings
I have had an ResMed AirCurve ASV for about a month now. The recent settings work pretty well. I had severe sleep apnea and used to have an AirSense 10 AutoSet but had mixed apnea and complex apnea and now have an ASV. My recent settings are EPAPmin=7, EPAPmax=15, PSmin=2.4, PSmax=18. This is the result, and it is a significant improvement before probably due to lowering PSmin from 4 to 2.4. I plan to change new settings tonight to EPAPmin to 6 and PSmin to 2.6, and PSmax to 15. Does this make sense to you? I will post the results in the morning. I hope I'm getting close to the optimum settings. What are your suggestions?


Attached Files Thumbnail(s)
   
Post Reply Post Reply
#2
RE: ASV Settings
All of the residual events are obstructive and appear to be positional. Watch out for chin-tucking. https://www.apneaboard.com/wiki/index.ph...onal_Apnea
Sleeprider
Apnea Board Moderator
www.ApneaBoard.com

____________________________________________
Download OSCAR Software
Soft Cervical Collar
Optimizing Therapy
Organize your OSCAR Charts
Attaching Files
Mask Primer
How To Deal With Equipment Supplier


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#3
RE: ASV Settings
I tried eliminating my wedge pillow and just using a thin pillow. I tried to keep from tucking my neck but did not have any improvement.
Post Reply Post Reply
#4
RE: ASV Settings
I eliminated the wedge pillow and only had a thin pillow. It did not seem to help, although I tried to avoid tucking my chin. I will go back to using the wedge pillow and avoid tucking my chin tonight.
Post Reply Post Reply
#5
RE: ASV Settings
my understanding is ASVs are highly sophisticated and basically a turnkey product. If obstructions persist, the only troubleshooting step is increasing EPAP until they subside.

See pic related and link: https://www.apneaboard.com/wiki/index.ph...tion_(ASV)


Attached Files Thumbnail(s)
   
Post Reply Post Reply
#6
RE: ASV Settings
Jwest, learn about the positional apnea paradox. These types of obstructions do not respond to higher pressure, and the apnea in the example above were not eliminated, even above 13 cm EPAP. We could increase EPAP to the point that the ASV would no longer function for central apnea, and would be very uncomfortable and still not fully resolve the obstruction arising from positional obstruction.
Sleeprider
Apnea Board Moderator
www.ApneaBoard.com

____________________________________________
Download OSCAR Software
Soft Cervical Collar
Optimizing Therapy
Organize your OSCAR Charts
Attaching Files
Mask Primer
How To Deal With Equipment Supplier


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#7
RE: ASV Settings
ahh ok yeah, that makes sense. I yield. It does look like even at extremely high pressure they did not resolve. Thanks for the explanation.
Post Reply Post Reply
#8
RE: ASV Settings
Thanks, I agree about EPAP settings. I have EPAP min set to 6 and it usually goes up as necessary since the ASV is set to ASV Auto mode. I will get a soft cervical collar to try out. If anyone has a suggestion, let me know. Thanks in advance!
Post Reply Post Reply
#9
RE: ASV Settings
I had the best night so far on my ASV. AHI was 1.19, mainly because I concentrated on only sleeping on my sides. I had 0 unclassified apneas, only hypopneas. I usually have mainly obstructive apneas when sleeping on my back, so the AHI worked perfectly to eliminate the centrals when on my side. I know my sleeping positions because I recorded the night with my video camera, and correlated the timeline with OSCAR. ASV is awesome!
Post Reply Post Reply
#10
RE: ASV Settings
That's great! you have figured out what works and found a way to minimize the positional events. Hard to beat that.
Sleeprider
Apnea Board Moderator
www.ApneaBoard.com

____________________________________________
Download OSCAR Software
Soft Cervical Collar
Optimizing Therapy
Organize your OSCAR Charts
Attaching Files
Mask Primer
How To Deal With Equipment Supplier


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  AirCurve 10 ASV settings - Equivalent settings for AirCurve 10 VAUTO Shadowpup 0 1,210 11-18-2022, 05:04 PM
Last Post: Shadowpup
  ResMed Adjust ASV Settings to AutoASV Settings ronsch00 4 4,159 06-09-2017, 10:57 PM
Last Post: DeepBreathing
  SleepyHead Question: machine settings on Daily Sidebar don't match actual settings Kris the Crone 6 2,434 06-15-2016, 04:37 PM
Last Post: Kris the Crone
Question Auto CPAP settings vs Auto BiPAP settings thasan26 1 3,041 05-06-2016, 02:32 PM
Last Post: robysue


New Posts   Today's Posts


About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.