Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

ResMed A10 AutoSet on DC
#1
ResMed A10 AutoSet on DC
Hi everyone,

I'm a new boy with a question about the ResMed AirSense 10 AutoSet. I am considering buying one of these machines for two primary reasons. One that it has auto pressure level compared to the fixed (but also "Sensawake) F&P Icon Premo that I currently use; but more importantly that ResMed offer a 12/24v DC power source which hopefully means I can better use in my caravan when away from AC power sources.Big Grin

The van is pretty well equipped with 3 x 120amp AGM heavy duty batteries & solar panels, so I am hopeful I will be able to use the machine at night with some light humidification.

Has anyone had any experience at doing this?

I tried the F&P machine (110 to 240v AC only), but could only use with an inverter and without humidification, which still drained a lot of power and was too dry for me with nasal pillows at the time. Angry

Appreciate any 12 volt experience that might be out there & hope I have put this in the right place?

Happy days
PJ.
Thanks
Post Reply Post Reply
#2
RE: [split] ResMed A10 AutoSet on DC
(10-25-2014, 09:03 PM)pjfollyfarm Wrote: Hi everyone,

I'm a new boy with a question about the ResMed AirSense 10 AutoSet. I am considering buying one of these machines for two primary reasons. One that it has auto pressure level compared to the fixed (but also "Sensawake) F&P Icon Premo that I currently use; but more importantly that ResMed offer a 12/24v DC power source which hopefully means I can better use in my caravan when away from AC power sources.Big Grin
. . .

Hi PJ,
I'm a ResMed user myself, and like it very much. But if you're planning to be off-grid for extended times, it might be worth it to consider the equivalent machine in the Philips-Respironics line. The PR machines operate on 12-volts DC, and can be hooked up directly to a 12-volt battery (being Extremely careful with polarity). This saves the power waste of an inverter, etc. and can extend the run-time of your battery charge. Whichever machine you choose, you would need to use the heated humidifier sparingly if at all, as it is power-hungry.

If you currently use humidification, I would try a few nights reducing or eliminating the humidifier, just to see how it will feel. This will tell you quite a bit about how much power you need to plan for.

Good luck and good travelling.
A.Becker
PAPing in NE Ohio, with a pack of Cairn terriers
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  ResMed AirSense 10 Respond (Autoset) dropped a foot radarrab 2 122 11-28-2024, 09:58 PM
Last Post: srlevine1
  should I use cpap pressure over autoset Person 35 2,064 11-05-2024, 12:51 PM
Last Post: Dormeo
  Airsense 10 Autoset Too Much Pressure? MiRock72 14 809 10-16-2024, 08:48 PM
Last Post: MiRock72
  [Diagnosis] How to know if I am "deep sleeping" in OSCAR with RESMED AutoSet 10? sebasan2006 2 273 10-08-2024, 09:03 PM
Last Post: sebasan2006
  Resmed S9 Autoset an error message after changing the motor SealL30 5 1,237 10-06-2024, 10:45 PM
Last Post: Rickyricardo
  How to clean your Resmed AutoSet 10 heated hose? Hmm888 9 8,873 08-30-2024, 10:33 AM
Last Post: Big Guy
  [Pressure] Resmed Airsense 10 Autoset Turpentine 6 468 08-28-2024, 05:41 PM
Last Post: G. Szabo


New Posts   Today's Posts


About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.