Has anyone had a failure with one of these? Is intermittent "dead machine" the failure mode?
Hello Guest,
Welcome to Apnea Board !As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address. Login or Create an Account
Resmed Airsense 10 Autoset - Failure Mode?
|
07-08-2024, 09:26 AM
Resmed Airsense 10 Autoset - Failure Mode?
My machine shut down last night after 2 hrs 20 minutes. It was dead with no power. I unplugged and plugged it back in a few times with no change. (I don't know if the little green light on the power supply was on or off.) I tried unplugging and plugging in again this morning with no change. An hour of so later, I take a detailed look at the power supply and the green light is on. I then measure 24 volts on the output side of the power supply. I plug it back into the machine and it magically works.
Has anyone had a failure with one of these? Is intermittent "dead machine" the failure mode?
07-08-2024, 03:36 PM
RE: Resmed Airsense 10 Autoset - Failure Mode?
If you don't know if the power supply light was on or off, it sounds like you have not yet ruled out a power supply failure. If that's the problem, you can replace the power supply for about $60 or so. Good luck!!
07-08-2024, 04:25 PM
RE: Resmed Airsense 10 Autoset - Failure Mode?
On a few occasions I have had a problem with the plug to my ResMed10 CPAP not making good contact. This occurred after I plugged it back in after I had removed the CPAP from the drawer I keep it. All I did to get it working was to spin and push on the contact or just pull it out and plug it back in. Although, I have never had it do it when it was running. Hopefully this is the same problem with your machine. A while back I had to send an almost new ResMed10 in with a stuck SD card in it. It took ResMed 4 months to fix it...
I am not an expert...just a long time user.
Positional Apnea OSCAR - The Guide Soft Cervical Collar Optimizing therapy OSCAR Chart Organization
07-09-2024, 05:25 PM
RE: Resmed Airsense 10 Autoset - Failure Mode?
I use a ResMed 10 CPAP for travel and it wouldn't start Sunday night because the wall outlet at my hotel was too loose. I travel with a plug adaptor which often gives a better fit in a three prong outlet because it's two prong socket is not as loose, which solved the issue. A power bar is an idea as well.
ResMed took more than 4 months, in fact they took an infinite time to repair my S9 which I wanted as a backup. That's because although it was delivered to their warehouse, they lost it. After a bit of hemming and hawing, the distributor where I live agreed to give me a brand new one for free and didn't even ask for the $350 flat repair fee. So now I have an S9 with about 60 hours on it, an S10 with 22,000 hours on it which I am not repairing the blower on until it quits, and an S11 I got on Kijiji with APAP for $450, with 19 used hours on it. |
« Next Oldest | Next Newest »
|
Possibly Related Threads... | |||||
Thread | Author | Replies | Views | Last Post | |
[Equipment] Higher AHI Readings on AirSense 11 than AirSense 10 | Bmck8381 | 3 | 344 |
11-20-2024, 11:49 AM Last Post: G. Szabo |
|
ResMed AirSense 10 Burn Smell | bsullivan | 113 | 37,600 |
11-19-2024, 10:16 AM Last Post: Sleepster |
|
[Equipment] ResMed AirSense 11 compatible pulse oximeters | timtaller | 120 | 52,620 |
11-18-2024, 02:21 PM Last Post: Crimson Nape |
|
Resmed Airsense 11 | Sleepyrob54 | 5 | 243 |
11-16-2024, 03:53 PM Last Post: Mecate13 |
|
Potential for iVaps mode to help with UARS | mintjberry | 10 | 1,988 |
11-14-2024, 02:36 AM Last Post: sleepykittycat |
|
Airsense 11 Autoset oximetry data not showing up in OSCAR | Sleepy Willy | 7 | 293 |
11-10-2024, 03:10 PM Last Post: e727147 |
|
Resmed Airsense 11 Random SD Card Issues | ineedsomesleep | 5 | 282 |
11-09-2024, 01:30 PM Last Post: sauerkraut |