08-15-2016, 02:36 PM
Pressure
I have a Phillips Respirator RemStar Plus C-Flex System 1. Problem is that my pressure went up to 16 and I need it on 3. How can I reset it?
Hello Guest,
Welcome to Apnea Board !As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address. Login or Create an Account
Apnea Board Forum - CPAP | Sleep Apnea
/
Public Area
/
Main Apnea Board Forum
/
[Equipment] Pressure
/
[Equipment] Pressure
|
[Equipment] Pressure
|
tuniamac
Posts: 1 Threads: 1 Joined: Aug 2016
Machine: Phillips Remstar Plus System one 
Sleeprider
Wiki Editor 
Posts: 28,429 Threads: 88 Joined: Dec 2014
Machine: Resmed Aircurve 10 VAuto
08-15-2016, 03:30 PM
(This post was last modified: 08-15-2016, 03:32 PM by Sleeprider.)
RE: Pressure
Welcome to the forums. Some of your terminology is mixed up, but it sounds like you want to change the Flex setting to 3, due to a pressure setting of 16 cm. You can get the provider manual for your Respironics PR System One REMstar Plus with C-Flex by email, by requesting it from the forum. Send an email to: apneaboard@gmail.com and put "Setup Manual" (without the quotes) in the subject line. Then, in the body of your email paste: Respironics PR System One REMstar Plus with C-Flex
Follow this link for easy instructions, with pictures on how to access that menu: http://www.apneaboard.com/pr-system-one-...structions
Sleeprider
Apnea Board Moderator www.ApneaBoard.com ____________________________________________ Download OSCAR Software Soft Cervical Collar Optimizing Therapy Organize your OSCAR Charts Attaching Files Mask Primer How To Deal With Equipment Supplier INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
trish6hundred
Posts: 8,263 Threads: 6 Joined: May 2012
Machine: Resmed AirSense 10 AutoSet For Her
08-15-2016, 05:13 PM
RE: Pressure
Hi tuniamac,
WELCOME! to the forum.! Good luck to you with your CPAP therapy.
trish6hundred
|
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
|
Z2 pressure vs Airsense11 pressure | jwalker5 | 2 | 294 |
08-17-2024, 12:11 PM Last Post: jwalker5 |
| Isn't Resmed's Expiratory Pressure Relief really Inspiratory Pressure Support?? | Reznik | 122 | 22,840 |
12-09-2023, 12:54 PM Last Post: Kathy14225 |
|
| Any downside to using static pressure vs range pressure? | hejohoo | 6 | 1,406 |
09-08-2023, 11:50 AM Last Post: Gideon |
|
| [Pressure] Pressure suggestions to reduce ear pressure? | rv88 | 0 | 853 |
05-24-2023, 05:43 AM Last Post: rv88 |
|
| FFM HELP: no leaks, no nose bridge pressure and no headgear pressure on back of neck? | koy23 | 6 | 1,986 |
01-22-2023, 07:33 PM Last Post: koy23 |
|
| Is expiratory pressure relief similar to BiPAP on lower pressure settings? | drmaestro | 11 | 4,281 |
05-18-2020, 01:35 PM Last Post: Gideon |
|
| [Pressure] Difference between EPAP set pressure and operational pressure | brugerard | 8 | 2,822 |
01-02-2020, 10:03 PM Last Post: brugerard |
|
Apnea Board Forum - CPAP | Sleep Apnea
/
Public Area
/
Main Apnea Board Forum
/
[Equipment] Pressure
/
[Equipment] Pressure
