Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

No more Auto mode for me
#11
RE: No more Auto mode for me
IMHO if the autoset range is narrow enough (mine is 9-14) your experience is very similar to being in S mode. Originally I was at 4-16 and found the large pressure changes to be disturbing and the AHI was higher. My average pressure is around 10, 95% about 12 and I rarely see a a max above 13 so really it's almost constant. To me the value of the autoset was the ability to self titrate, tweak and arrive at the best range.
Post Reply Post Reply
#12
RE: No more Auto mode for me
I've only been using the Auto setting for a month, and it's helped me a great deal. I was on a set pressure from 2005 until last month, but have found that the Auto feature really helps me to sleep through the night without suddenly waking. Just saw the sleep specialist today, and my stats are really good, so I guess the Auto thing agrees with me. Everyone is different. Smile
Post Reply Post Reply
#13
RE: No more Auto mode for me
(08-28-2014, 10:29 PM)Ghost1958 Wrote: Ive had pretty good luck with Auto on the PR560 auto. It was set by the sleep lab and doc to min 6 max 15. However with the Optistart turned on every thirty hours it recalculates the starting pressure to where it has run 95 percent of the time to eliminate events.

That is pretty cool. I did not realize that the PR auto machines did that.
That seems to me to be a great feature.

Admin Note:
PaytonA passed away in September 2017
Click HERE to read his Memorial Thread

~ Rest in Peace ~
Post Reply Post Reply
#14
RE: No more Auto mode for me
(08-29-2014, 11:08 AM)PaytonA Wrote:
(08-28-2014, 10:29 PM)Ghost1958 Wrote: Ive had pretty good luck with Auto on the PR560 auto. It was set by the sleep lab and doc to min 6 max 15. However with the Optistart turned on every thirty hours it recalculates the starting pressure to where it has run 95 percent of the time to eliminate events.

That is pretty cool. I did not realize that the PR auto machines did that.
That seems to me to be a great feature.

I dont know if the pr550 autos did or not. The 560 autos do.

And your doc can have the DME disable the feature and it wont show up except in the clinical menu so alot of folks probably dont know the machine has Optistart. My Doc didnt disable anything and neither did the DME because I told them up front I knew how to get into to clinical and would just turn all the features on I wanted if they didnt LOL.

But yes it works very well at narrowing the min pressure and max pressure to an effective range and keeping it there as it changes by recalculating every thirty hours of use. After 4 nights it bumped my start pressure up to 8.5. The preset 6 and 15 still show in the menu but when therapy starts it shows a screen Optistart 8.5 then backlight goes out. The sleepy head and Encore basic software show the new start pressure as "Optistart 8.5" or whatever pressure it has recalculated itself too whenever it changes the start pressure

But it wont go above the max set pressure.

Post Reply Post Reply
#15
RE: No more Auto mode for me
(08-28-2014, 07:01 PM)Peter_C Wrote: My sleep doc only suggests auto mode for learning. He likes set pressures as he believes your body responds better to set pressures better - even with the risk on an event coming that might need a higher pressure. He believes better sleep/rest to be had with fixed pressures.

Does your sleep doc understand that you don't have to use the full 4-20 pressure range? Many of them don't seem to understand this. If you "need" a pressure of 12, the minimum pressure can be set to be 10, and you don't have to start back at 4 every night. I think almost everyone gets better sleep if they don't start way below their "normal" pressure.

You can still leave the maximum pressure set a little higher or even wide open if you don't get "runaways" to handle difficult nights, different sleeping positions, different sleep stages, etc.

As a worst case, if you would use 12 on manual, you can still set the minimum pressure at 12.
Get the free OSCAR CPAP software here.
Useful links.
Click here for information on the main alternative to CPAP.
If it's midnight and a DME tells you it's dark outside, go and check it yourself.
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Potential for iVaps mode to help with UARS mintjberry 10 2,086 11-14-2024, 02:36 AM
Last Post: sleepykittycat
  PR Dreamstation Preheat Mode Missing LBTRS 7 4,279 11-04-2024, 03:32 PM
Last Post: DiLion
  [CPAP] ResMed full face mode vs. nasal mode Gus Wah 23 4,829 11-01-2024, 07:40 PM
Last Post: PeaceLoveAndPizza
  Airsense 11 Auto - What is auto-off supposed to do? Schnoozer 3 314 10-31-2024, 07:33 PM
Last Post: Warnick13
  Difference between S-Mode and VAUTO mode - Aircurve MrIvanDrago 12 1,633 10-11-2024, 08:33 AM
Last Post: MrIvanDrago
  S-mode ovmeadows 4 361 09-19-2024, 08:48 PM
Last Post: Crimson Nape
  MODE Question Big Guy 13 758 07-13-2024, 05:41 AM
Last Post: Narcil


New Posts   Today's Posts


About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.