02-04-2018, 04:36 PM
How am I doing
[attachment=4294][attachment=4294] New to this hope I did it right any help would be great. Thanks
Hello Guest,
Welcome to Apnea Board !As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address. Login or Create an Account
|
How am I doing
|
jrchap
Posts: 6 Threads: 4 Joined: Jan 2018
Machine: REMstar Auto A-Flex 561CA 
Walla Walla
Posts: 3,551 Threads: 41 Joined: Jun 2017
Machine: ResMed AirCurve 10 VAUTO
02-04-2018, 05:56 PM
RE: How am I doing
Numbers look good. If the snores are bothering you or someone else you might want to bump up the minimum pressure to 9cm or so.
Download SleepyHead
Organize your Sleepyhead Charts Posting Charts Beginner's Guide to SleepyHead Mask Primer  Advisory Members serve as an "Advisory Committee" to help shape Apnea Board's rules & policies. Membership in the Advisory Members group does not imply medical expertise or qualification for advising Sleep Apnea patients concerning their treatment.
Gideon
Wiki Editor 
Posts: 12,828 Threads: 295 Joined: Dec 2016
Machine: ResMed Aircurve 10 VAuto
02-05-2018, 04:18 PM
RE: How am I doing
First your numbers are EXCELLENT
 . With an AHI UNDER 1.0 all changes that you make should be minimal and mostly targeting comfort.Your "base" seems to be about 8.5 cmw, so I would raise the minimum to 7 cmw which is under this value. This should help your initial flow rate when you start using the machine. After this changes should be no more than .5 cmw and held for about a week before making additional small changes. IF your AHI was higher I would consider raising your Max pressure, again in small increments, but your numbers are awesome so I wouldn't make that change. Fred
Gideon - Project Manager Emeritus for OSCAR - Open Source CPAP Analysis Reporter
Download OSCAR OSCAR - The Guide New to Apnea? Helpful tips to ensure success Soft Cervical Collar Mask Primer Dealing with a DME Organize Charts Optimizing Therapy
Sleeprider
Wiki Editor 
Posts: 28,419 Threads: 88 Joined: Dec 2014
Machine: Resmed Aircurve 10 VAuto
02-05-2018, 05:30 PM
RE: How am I doing
It sure looks like a higher minimum pressure would perhaps be more comfortable. Your median is 9.9 and the pressure goes to 12.0. If the pressure doesn't bother you, or if you like more air, I'd set 8 as the minimum just to avoid pressure swings. A higher pressure than 12 does not appear to be needed. The pressure graph is not graphing the Flex pressure, but not a big deal. Especially with Flex at 3 I think the higher minimum pressure will work better for you. As others have said, there is no "need" to change, but I think it will work out for you.
Sleeprider
Apnea Board Moderator www.ApneaBoard.com ____________________________________________ Download OSCAR Software Soft Cervical Collar Optimizing Therapy Organize your OSCAR Charts Attaching Files Mask Primer How To Deal With Equipment Supplier INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
trish6hundred
Posts: 8,263 Threads: 6 Joined: May 2012
Machine: Resmed AirSense 10 AutoSet For Her
02-05-2018, 07:49 PM
RE: How am I doing
Hi jrchap,
WELCOME! to the forum.! Good luck with CPAP therapy.
trish6hundred
jrchap
Posts: 6 Threads: 4 Joined: Jan 2018
Machine: REMstar Auto A-Flex 561CA
|
|
« Next Oldest | Next Newest »
|
