Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.
Login or Create an Account
INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
There is still some work to do to have Sleepyhead display all the settings correctly. What we need is for a volunteer with a SV machine, with a lot of patience poking through menus, to experiment with changing setting options one by one and recording short sessions then documenting each change and referencing the session (.001) summary file to go with it.
The file structure of the Auto SV is stored in the Folder P-Series, which has subfolders. Subfolder P1 has .001,./002 and .005 files which are date and time-stamped as shown in the attachment. What we need to do is to change settings like Mode, EPAP Min, EPAP Max, PMax, PS Min, PS Max, BPM, Ramp, Humidity, etc and document what change was made and the file it applies to. It will take at least two and preferably 3 changes of settings on each setting option with a 2 to 5 minute run time, then documenting the change and naming the file or time-stamp.
Who has time on their hands? As you can see, this will take some time to go through the settings and document what changes to to what sessions, but all the sessions will be recorded as you go, so only one upload is required.
INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
The attached image here shows the settings available for the PRS1 960 Auto SV. I don't have the Dreamstation version handy, but this will do. These are the settings that need to be switched and documented, and the easiest way to do it is to grab your manual, document your existing settings so you can return to those, then systematically start working through the settings one-by-one, and recording brief sessions.
INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
The latest Sleepyhead master has been uploaded to GitLab if any of you are capable of building in Git. I have done it before, and it is not the easiest thing to do. This is the first release of Sleepyhead to support the Philips Dreamstation Auto SV Advanced, and the Devilbiss Intellipap2 DV54 machines. https://gitlab.com/sleepyhead/sleepyhead-code
INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
While it doesn't apply to my ResMed and me, thanks to Sir Sleeprider and JediMark for adding to the Sleepyhead list of compatible devices. Since getting my ASV, I've noticed there's an increasing number of ASV users here on AB.
INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEBSITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
All users benefit from a functional Sleepyhead, but the ASV users are special since there is so much going on. Really nice to finally see this support. Philips should be glad to see it, and it would be nice if they would offer to help decode the machine data stream to the SD card. It would save a lot of work that ends up making their machines more desirable and marketable.
INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
I put a red "Admin Note" onto this thread so that it gets more attention.
Once we get enough volunteers for testing the Dreamstation 900 AutoSV updates and the code is finalized, I'll move this thread into the Software Support Forum.
Thanks to all who have helped Mark to update the SleepyHead code.
INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Machine: Dreamstation BIPAP Mask Type: Nasal pillows Mask Make & Model: Most recent: Airfit P10, Wisp, Pilairo, Mirage Vista Humidifier: Dreamstation BIPAP, but without humidifier, also S9 VPAP Auto CPAP Pressure: 15-25 CPAP Software: OSCAR
SleepyHead
A bit off-topic but a few days ago I got a Dreamstation Auto from Kaiser Permanente. I quickly discovered that even the latest SleepyHead can't parse the data. Mark (JediMark) is aware and I have uploaded the first three days data to him. My impression is that the data from my machine (manufactured January 2018) is different from earlier Dreamstation Auto machines.
![[Image: attachment.php?aid=5065]](http://www.apneaboard.com/forums/attachment.php?aid=5065)
!
