Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

bipap auto results
#1
bipap auto results
Hello folks! I've been wearing a cpap since 2000. A little over a year ago I saw a new sleep doctor (40 miles closer than the initial one) and he prescribed a respiroinics bipap auto 750p.

My sleep life has been miserable since. Back to the sleep doc twice and he raised ipap by 1 each trip. No real difference in sleep.Typical ahi 10 - 17. What to do I ask myself Sleep doc no help, dme staff doesn't really understand the product.

So I start by changing ipap 10, 12, 13, 14 and sleep a night on each setting. Some little help between 10 - 13. On this machine max ps is 7. It is hard to exhale with an epap of 6 or 7.While going through the setup I had noticed a max pressure=25 and left it alone. As I said these changes produced marginal sleep benefits.

Last night before bed I decided to clean up the max pressure=25. Changed to 15 and stated top down through setup menu. Lo and behold in the mode selection there was a "auto biflex" selection. Turned it on and and set epap[=5. Got a decent nights rest (for me) with an ahi for 8.09.

My sleep study specified a cpap pressure of 13 (circa 2000). yeah i know. Last night ipap and epap danced around all over the chart for the first time ever epap 90% 8.00 max 9.00
ipap 10.00 11.00

So where to from here, guess I need to figure out get a sleepyhead chart posted here.
















Post Reply Post Reply
#2
RE: bipap auto resukts
I'm really surprised; I guess you must've gotten used to the high exhale pressure. I'm not familiar with that model but I assume that, like mine, it has a straight CPAP mode. Have you considered trying that?
Post Reply Post Reply
#3
RE: bipap auto resukts
Hi tubeheadmike,
WELCOME! to the forum.!
I don't know enough to give you advice on your BIPAP machine but hang in there and others will be along to help you, soon.
Best of luck to you.
trish6hundred
Post Reply Post Reply
#4
RE: bipap auto results
Hang tight there one of the geniuses will be around to help with that setup, was talking to one earlier, they'll be here to help soon.
If everyone thinks alike, then someone isn't thinking.
Everyone knows something, together we could know everything.
Post Reply Post Reply
#5
RE: bipap auto results
(08-19-2014, 09:33 PM)tubeheadmike Wrote: Hello folks! I've been wearing a cpap since 2000. A little over a year ago I saw a new sleep doctor (40 miles closer than the initial one) and he prescribed a respiroinics bipap auto 750p.

My sleep life has been miserable since. Back to the sleep doc twice and he raised ipap by 1 each trip. No real difference in sleep.Typical ahi 10 - 17. What to do I ask myself Sleep doc no help, dme staff doesn't really understand the product.

So I start by changing ipap 10, 12, 13, 14 and sleep a night on each setting. Some little help between 10 - 13. On this machine max ps is 7. It is hard to exhale with an epap of 6 or 7.While going through the setup I had noticed a max pressure=25 and left it alone. As I said these changes produced marginal sleep benefits.

Last night before bed I decided to clean up the max pressure=25. Changed to 15 and stated top down through setup menu. Lo and behold in the mode selection there was a "auto biflex" selection. Turned it on and and set epap[=5. Got a decent nights rest (for me) with an ahi for 8.09.

My sleep study specified a cpap pressure of 13 (circa 2000). yeah i know. Last night ipap and epap danced around all over the chart for the first time ever epap 90% 8.00 max 9.00
ipap 10.00 11.00


So where to from here, guess I need to figure out get a sleepyhead chart posted here.

This suggests to me that PS=2 is set.
You might need a wider split.
Admin Note:
JustMongo passed away in August 2017
Click HERE to read his Memorial Thread

~ Rest in Peace ~
Post Reply Post Reply
#6
RE: bipap auto resukts
(08-19-2014, 09:54 PM)eviltim Wrote: I'm really surprised; I guess you must've gotten used to the high exhale pressure. I'm not familiar with that model but I assume that, like mine, it has a straight CPAP mode. Have you considered trying that?
I did put it in cpap cflex2 for a few days, it did not work well at that time (it did work well for years). As it turned out I had a low B12 level which causes shallow breathing. It may be time to revisit. Mt guess is the anemia was caused by lack of rest, I sure have not missed any meals Rolleyes
Post Reply Post Reply
#7
RE: bipap auto results
[/quote]

This suggests to me that PS=2 is set.
You might need a wider split.
[/quote]
Mongo, that sounds logical, just checked max ps=7.
There is no min ps setting in auto biflex mode.

Last night:
AHI=6.96

90% max
ipap 10.00 11.2
epap 8.00 9.00
ps 3.9 4.00



Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Help interpreting results AlwaysProper 0 70 Yesterday, 10:22 AM
Last Post: AlwaysProper
  The results of the AHI chart are puzzling NationalRambo 11 388 11-07-2024, 11:16 PM
Last Post: PeaceLoveAndPizza
  WatchPAT Sleep Study Results Thehedgehog12 0 242 11-04-2024, 01:59 PM
Last Post: Thehedgehog12
  [Diagnosis] my sleep study results says more the. 15 arousels that last more then 15 seconds Fantasieimpromptu 3 230 11-01-2024, 07:43 AM
Last Post: Sleeprider
  Airsense 11 Auto - What is auto-off supposed to do? Schnoozer 3 267 10-31-2024, 07:33 PM
Last Post: Warnick13
  New to CPAP - Question about results Urimare 5 353 10-25-2024, 11:27 AM
Last Post: SarcasticDave94
  [Treatment] New to CPAP, inconsistent results as of late Vike3 5 350 10-22-2024, 08:18 PM
Last Post: Vike3


New Posts   Today's Posts


About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.