Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

'0' AHI - "Is machine broken"?
#21
RE: '0' AHI - "Is machine broken"?
(05-31-2016, 08:41 PM)OpalRose Wrote: Pressure can increase due to flow limitations and snores. I don't think GrammaBear has these flags enabled on her events graph, but could be occurring and cause pressure increase...but since those events aren't counted, that still equals an AHI of 0.

I have had an AHI of 0, but still recorded Flow Limitations.

I think you are right. I pretty well always have an AHI <1, but the pressure does vary, and if I look at the flow limitations graph there is a very strong correlation there. Last night I was at 0.12 with a single 10 second OA, the night before I was 0, but both graphs show the pressure varying and when the flow limitation goes up so does the pressure and vice versa.

Similarly I can see peaks in the pressure at the same time as significant snores occur.

Ed Seedhouse
VA7SDH

Part cow since February 2018.

Trust your mind less and your brain more.


Post Reply Post Reply
#22
RE: '0' AHI - "Is machine broken"?
(05-31-2016, 01:02 PM)GrammaBear Wrote: I don't read the SD card in my machine daily, but this morning I did put it in the card reader. The results confuse me because the AHI said it was '0'. I've been on cpap machine for 7 years and never had that number. I'm worried if something is wrong with my machine??

Hello GrammaBear - have to say it looks really real to me. Congratulations! (What is it about that Smiley Face that cheers us, adults, so much?)

I've only ever had I think 6 Smiley zeros in 18 months, and that's only with using my super-efficient ASV machine since November.

Only thing to suggest if you still have doubts - I see from your screenshot that you are using an 'older' Sleepyhead version 0.9.8-1. You could try downloading the latest SH version and rebuild your data and see what that says. But if I were you I would just celebrate your result.
...............................................................................................
All my opinions are only as an xPAP user trying to help other xPAP users.
No suggestions I may make should be taken as professional advice.
If you have medical concerns please consult a doctor


My current pressures: Auto-ASV. EPAP 10-13. PS 3-10

Post Reply Post Reply
#23
RE: '0' AHI - "Is machine broken"?
(05-31-2016, 01:02 PM)GrammaBear Wrote: I don't read the SD card in my machine daily, but this morning I did put it in the card reader. The results confuse me because the AHI said it was '0'. I've been on cpap machine for 7 years and never had that number. I'm worried if something is wrong with my machine??

Hi GrammaBear,
I also have an S9 Autoset, which I have been using for a little over 2 years. I have had a few nights with AHI of 0. After reading some posts here that the S9 series seems to have an issue with getting "stuck" on zeros, I now disconnect the machine from the power brick whenever I record a zero, and plug it back in when I am ready to go to bed again. So far, this has successfully avoided the repeating zeros problem.

Congratulations on your zero ! ! ! Amazing
Good luck,
A.Becker
PAPing in NE Ohio, with a pack of Cairn terriers
Post Reply Post Reply
#24
RE: '0' AHI - "Is machine broken"?
Update: My numbers are back to normal (whatever that may be) as last night ahi was 0.5 with 2 OA events at 10 sec each and 2 OA events at 19 sec each and 1 hypopnea at 19 sec. It was nice to have one smiley face after 7 years on cpap.
Post Reply Post Reply
#25
RE: '0' AHI - "Is machine broken"?
Congrats Gramma Bear! There are two ways to verify a 0 AHI night. First, check the machine readout and ResScan. Second, enable flow limitations events flags in SH - UF1 and UF2. These don't qualify as events because of shorter then 10 second duration so don't get recorded as AHI but if they appear then you know your machine is most likely working correctly and your 0 is legit. If you enable them now and then restart SH you will be able to see if you had any UF1 or UF2 "events" during your 0 nights which would make your 0 absolutely legit.
Coffee

Happy Pappin'
Never Give In, Never Give Up




INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. 
Post Reply Post Reply
#26
RE: '0' AHI - "Is machine broken"?
I too had a 0 AHI. Nothing was wrong on mine. Just had a good night. As was said earlier, it's not the numbers as much as how you feel. Some of my best nights produce worse numbers.
CPAP is a journey like “The Wizard of Oz”. It’s a long slow journey. You will face many problems and pick up many friends along the way. Just because you reach the poppies, it doesn’t mean you are in Kansas. 
Post Reply Post Reply
#27
RE: '0' AHI - "Is machine broken"?
Look at your 7 day average on your machine. Are you registered with Res Med My air? The seven day average would be there also.

A zero on any one day just means you therapy is working well Sleep-on-pillow

A seven day average of zero should be investigated



(05-31-2016, 04:05 PM)GrammaBear Wrote:
(05-31-2016, 03:56 PM)eseedhouse Wrote: I have 0 AHI maybe half of my nights. But it's no big deal - what counts is how you feel!

Did you automatically 'know' everything was OK the first time it happened to you? For me, it is a shock because nothing like this has ever, ever happened to me. My machine is a 'gently used' machine purchased after my prior machine had to be replaced because the bearings went out on the motor. Don't get me wrong, I'm glad to have something good, just afraid because I didn't know what happened.

2004-Bon Jovi
it'll take more than a doctor to prescribe a remedy

Observations and recommendations communicated here are the perceptions of the writer and should not be misconstrued as medical advice.
Post Reply Post Reply
#28
RE: '0' AHI - "Is machine broken"?
I will hit 0 several times a night for extended periods, but usually start out with a higher number (around 5-6) as I start out sleeping on my back. My 7 day average sits in the low 2s. I can live with it and I usually feel great during the day.

Homer
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
Exclaimation CPAP Machine Choices - read this before you accept a new machine SuperSleeper 305 284,889 10-28-2024, 07:30 PM
Last Post: ZacharySimon
  New machine vs. Old Machine - Same Model MrIvanDrago 1 268 10-10-2024, 08:20 AM
Last Post: Crimson Nape
  Can use ASV machine as Bipap S/T machine? soyjer 17 869 08-07-2024, 08:30 PM
Last Post: soyjer
  [Equipment] F20 elbow connector broken JustCauseWhyNot 5 361 07-20-2024, 07:31 PM
Last Post: Phaleronic
  Dreamstation LCD Backlight Broken FatSleeper15 0 526 09-19-2023, 08:09 PM
Last Post: FatSleeper15
  Climateline heated hose - broken or bad connection Wondering2 0 1,311 12-09-2022, 01:37 PM
Last Post: Wondering2
  machine died! Now new doctor and new machine Bjazzman 17 7,569 09-05-2022, 09:07 PM
Last Post: NValtman11


New Posts   Today's Posts


About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.