+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: Help with Airsense 10 Autoset settings (/Thread-Help-with-Airsense-10-Autoset-settings)
Pages:
1
2
RE: Help with Airsense 10 Autoset settings - zonk - 10-11-2015
(10-11-2015, 12:38 PM)lavamanz Wrote: Leak rate (95th percentile) varies from 4.8L/min to 15.6L/min. No dry mouth or runny nose, I do not use the humidifierAt or below 24 L/m is acceptable, your numbers much lower than that ... good job
BTW, do you turn humidity level off, with the water tank empty or add some water in the tank (passover, no heat)
There is a side cover for the AirSense 10 replaces the water tank, the machine does not work without the water tank or the side cover inserted
Anyway, one job less, you won't have to worry about cleaning the water tank, heated tube, or distilled water
RE: Help with Airsense 10 Autoset settings - lavamanz - 10-11-2015
(10-11-2015, 04:03 PM)zonk Wrote:(10-11-2015, 12:38 PM)lavamanz Wrote: Leak rate (95th percentile) varies from 4.8L/min to 15.6L/min. No dry mouth or runny nose, I do not use the humidifierAt or below 24 L/m is acceptable, your numbers much lower than that ... good job
BTW, do you turn humidity level off, with the water tank empty or add some water in the tank (passover, no heat)
There is a side cover for the AirSense 10 replaces the water tank, the machine does not work without the water tank or the side cover inserted
Anyway, one job less, you won't have to worry about cleaning the water tank, heated tube, or distilled water
I just turn humidity to off, I didn't use it on the previous ResMed CPAP either. It has never bothered me & is a lot less triuble