+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: AirSense™ 10 AutoSet™ Problems Not Recording & Tube Blockage Errors (/Thread-AirSense%E2%84%A2-10-AutoSet%E2%84%A2-Problems-Not-Recording-Tube-Blockage-Errors)
Pages:
1
2
RE: AirSense™ 10 AutoSet™ Problems Not Recording & Tube Blockage Errors - Mark Douglas - 12-05-2015
her sleep doc seems a bit jeolos of his station as high priest of CPAP. I'll wait she is almost out of probationary time.
BTW that Guinness at Celtic Ray will be delayed a month or two.
RE: AirSense™ 10 AutoSet™ Problems Not Recording & Tube Blockage Errors - AlanE - 12-05-2015
Not a problem. This is a busy time of year with staff vacations and such.
RE: AirSense™ 10 AutoSet™ Problems Not Recording & Tube Blockage Errors - Laflamme - 09-08-2018
I have been having some issues with my Resmed AirSense™ 10 AutoSet™machine with a climate line tube. I have been using this machine since September 2017. I have read some posts that seem like are close to my problem to figured out what might be going on.
There are 2 issues I have been dealing with: stop recording after a couple of minutes use but still continue to work or get a message that I get about once a night that my tube is blocked and the machine turns off, for the last 3 nights steady.
Has anyone else have experienced this problem? I don’t understand what has recently happen that may be causing this since I had no issues since September 2017 until the last month, and I keep getting these same issues on the 2 new Climate Line tubes that I change.
Any help is appreciated!
RE: AirSense™ 10 AutoSet™ Problems Not Recording & Tube Blockage Errors - jaswilliams - 09-08-2018
I would look at changing your filter or test running the machine temporarily with no filter to see if it makes a difference I would guess it’s not the tube but the filter restricting the machine flow but it could be have you tried the things in this tread to reduce rainout ?
If that does not resolve anything then take it back to where you bought it from as it will still be under warranty