+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: Clicking noise from ResMed Airsense10Autoset (/Thread-Clicking-noise-from-ResMed-Airsense10Autoset)
Pages:
1
2
RE: Clicking noise from ResMed Airsense10Autoset - jlco01 - 06-01-2021
I had the same clicking sound, and fixed it by inserting a very thin piece of plastic into the 2 clasps that close the lid. This made the seal a little tighter. I closed the lid first, then put in the plastic pieces.
RE: Clicking noise from ResMed Airsense10Autoset - Dougrox - 02-06-2022
Hi friends, I have the same irritating issue.
RE: Clicking noise from ResMed Airsense10Autoset - Chuck Welsh - 02-10-2022
Dabbed a little mineral oil around the plastic surround of the humidifier box, that worked for me.
RE: Clicking noise from ResMed Airsense10Autoset - rzwilson - 07-26-2023
simple solution.....put a rubber band each night around water tank to hold it tight. no more clicking noise! also, i am retired and my insurance cover a water tank replacement.
RE: Clicking noise from ResMed Airsense10Autoset - Sleepster - 07-26-2023
The problem does indeed come from the upper section of the water tank moving relative to the lower portion. There is a gasket between them. I believe the problem happens when that gasket gets compressed too many times and is no longer thick enough.
Any of the above solutions will work, but for me it's a signal that I need a new water tank.