+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: resmed aircurve 10 asv settings (/Thread-resmed-aircurve-10-asv-settings)
Pages:
1
2
RE: resmed aircurve 10 asv settings - clothe1973 - 07-13-2020
Okay, that makes sense. You add the EPAP and PS settings to get your IPAP numbers. So, if I set the min EPAP to 6 and the min PS to 6, my min IPAP number will be 12. So, with my current settings, my IPAP range is from 12 to 30. Now, more or less, I know how to set the ASV machine. Thank you for posting. : )
RE: resmed aircurve 10 asv settings - SarcasticDave94 - 07-13-2020
You're welcome. Post OSCAR data when you have it.
RE: resmed aircurve 10 asv settings - sheepless - 07-13-2020
note that even though the combination of epap max and ps max can be over 30, the machine won't go over 25 cmw.
RE: resmed aircurve 10 asv settings - SarcasticDave94 - 07-13-2020
(07-13-2020, 03:51 PM)sheepless Wrote: note that even though the combination of epap max and ps max can be over 30, the machine won't go over 25 cmw.
yes, that's correct sheepless, thx for the mention
RE: resmed aircurve 10 asv settings - clothe1973 - 07-13-2020
RE: resmed aircurve 10 asv settings - Sassbeek - 03-14-2023
Hey all, quick question. Is there a way to increase minimum PS on an ASV beyond 6? Mine is capped at a maximum minimum of 6
I'm working with Jason at axgsleepdiagnostics and basically we really want to keep my EPAP on the lower end because of Aerophagia but still have a larger minimum IPAP, and sadly this seems frustratingly impossible. Is there something obvious I'm missing?
-----
Moderator Action: DME Link Removed
Moderator Action: DME Link Removed
To maintain our status as an educational organization, links to DME-owned or DME-operated websites and links to pages that sell prescription-required items are prohibited in forum posts. This is stated in the Apnea Board Rules.
-----
RE: resmed aircurve 10 asv settings - Sleeprider - 03-14-2023
Sassbeek, you can change PS min in settings to anything up to 15 cm. The PS max must be at least PS min + 5.0. If you need the setup manual, don't hesitate to request one from the forum. As far as using a PS min greater than 6, I don't recommend it, but that is a topic for your therapy thread.
Note, I had to edit the .com out of your post link because that site sells prescription required equipment which violates Rule #3. http://www.apneaboard.com/forums/Thread-Admin-Note-Apnea-Board-Rules
RE: resmed aircurve 10 asv settings - Sassbeek - 03-14-2023
(03-14-2023, 11:14 AM)Sleeprider Wrote: Sassbeek, you can change PS min in settings to anything up to 15 cm. The PS max must be at least PS min + 5.0. If you need the setup manual, don't hesitate to request one from the forum. As far as using a PS min greater than 6, I don't recommend it, but that is a topic for your therapy thread.
Note, I had to edit the .com out of your post link because that site sells prescription required equipment which violates Rule #3. http://www.apneaboard.com/forums/Thread-Admin-Note-Apnea-Board-Rules
Ah, completely missed that in terms of the rule - sounds good!
And weirdly, I've seen others say the same as you, but I cannot get min PS above 6. No matter what I do to min and max epap, what I do to max PS and switching from ASV to ASVAuto it seems I 1) cannot have a min ps > 6 and 2) the gap between min and max ps must be at least 5 and no smaller. I'm not sure if this is some kind of funky firmware issue? It definitely seems from searching the web this isn't always, or wasn't always, the case
Don't suppose you can think of something incredible obvious I've missed? Otherwise, yep, I'll go searching for the setup manual and see what I can dig up
RE: resmed aircurve 10 asv settings - Sleeprider - 03-14-2023
Let's take this part of the discussion back to your therapy thread. http://www.apneaboard.com/forums/Thread-Switched-to-ASV-AHI-is-great-but-still-feel-like-I-m-not-sleeping-well?page=3
RE: resmed aircurve 10 asv settings - emmylouwho - 03-20-2023
This is super helpful. I’m learning what all these setting mean just now and seeing my EPAP is set at 8. Is that too high based on this info?