+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: Travelling 3 night - ResMed S9 Elite did not collect data (/Thread-Travelling-3-night-ResMed-S9-Elite-did-not-collect-data)
Pages:
1
2
RE: Travelling 3 night - ResMed S9 Elite did not collect data - diamaunt - 06-26-2014
(06-26-2014, 08:33 PM)zonk Wrote:(06-26-2014, 08:10 PM)diamaunt Wrote: sleep quality does not affect the data recorded, only what is displayed when you hit the 'i' button.I've responded to you in the other thread just a bit earlier and told you source of the information
you can still get full details in the extended report by holding down i and the setup button, no matter what the setting of sleep quality is.
Could you please supply your source, does seem contradict everything what I,m saying
well, it's documented that way in the clinician manual as what it's effect is.
plus, I've tested it on my machine, full data was recorded no matter what setting the 'sleep quality' setting was set to, the extended sleep report was available no matter what it's setting, the only difference was the 'i' screen, as documented in the clinician manual.
RE: Travelling 3 night - ResMed S9 Elite did not collect data - zonk - 06-26-2014
(06-26-2014, 09:08 PM)jcarerra Wrote: As for the overwrite issue, I will not try to state anything other than describe what happened to me.I edited my post few minutes before you, you would not see the edit if you don,t click on 'review post' button before clicking on 'post reply' button
I believe you,re correct about the flow data and select discard , I was wrong in mentioning it
As for the transmitter at the back of the machine, more likely is a modem transmitting data to your DME
If the transmitter can cause detailed data to disappear, I don,t know
Have you tried SleepyHead to see whether detailed data is actually on the card (sometimes the card goes inside the card slot but not pushed all the way until clicks in place)
SH will show no data for that night if there is no detailed data on the card but should be okay for other nights where there is detailed data
You don,t need overwrite/discard or save data using SH, just import data
RE: Travelling 3 night - ResMed S9 Elite did not collect data - jcarerra - 06-27-2014
OK
No, my life is crazy busy right now, so I have not gotten into Sleepyhead yet.
I am pretty sure the SD was into the slot since the summary and statistics were pulled off the card. I just downloaded last night's data, back home after the one night trip, and the detailed graphs did import--so I have no clue what happened that one night on travel when it disappeared; the only technical difference was that the "transmitter" was not installed.
I may try an experiment some night and take it out intentionally here at home to see if next day's detailed data goes missing.
Or it may be aliens.
RE: Travelling 3 night - ResMed S9 Elite did not collect data - diamaunt - 06-27-2014
(06-27-2014, 07:07 AM)jcarerra Wrote: Or it may be aliens.
or, to take a page from the old Sun Microsystems excuse book:
"Cosmic ray bit flip"
RE: Travelling 3 night - ResMed S9 Elite did not collect data - jcarerra - 07-03-2014
(06-26-2014, 07:59 PM)jcarerra Wrote: ...I did do the download again, but I WILL NOT select 'overwrite' EVER AGAIN--as it previously caused me serious grief (there is a thread containing it somewhere). You see, I discovered, too late, that the ResScan [<<<<CORRECTION: the machine, not ResScan] deletes flow data from all days except the last week. So, when you select 'overwrite', you write all those days with no flow data into your ResScan database--erasing the flow data you formerly had.