+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: Flow Limitation/UARS and BiPAP (/Thread-Flow-Limitation-UARS-and-BiPAP)
RE: Flow Limitation/UARS and BiPAP - Sleepster - 07-21-2014
(07-21-2014, 12:44 PM)PaytonA Wrote: With my vast lack of knowledge regarding dental appliances, whether of the TMJ or OSA variety, what I have read here by some other posters makes me wonder if it would not just add an extra complication for those who are mouth leakers or breathers.
Yeah, I guess the only to find out if it'll work for me is to spend the money on it and see what happens.
RE: Flow Limitation/UARS and BiPAP - car54 - 07-21-2014
(07-20-2014, 08:04 PM)Sleepster Wrote:I have a Remstar auto A flex by PR. It is in cpap-check mode with the C-flex + feature which reduces the pressure while exhaling.(07-20-2014, 06:27 AM)car54 Wrote: Last night, just for the heck of it, I set my machine back to apap with the lowest amount of pressure and I had about 200 occurrences of breathing problems. Obviously I will switch the machine back.
Set it back to what?
There are 3 degrees of pressure relief in the C-flex feature and I have it at #1. My base pressure is set to 10. All I know is that since switching from the auto-cpap mode my rera's have been very low.
Brad
RE: Flow Limitation/UARS and BiPAP - vsheline - 07-21-2014
(07-21-2014, 07:20 PM)car54 Wrote: I have a Remstar auto A flex by PR. It is in cpap-check mode with the C-flex + feature which reduces the pressure while exhaling.
There are 3 degrees of pressure relief in the C-flex feature and I have it at #1. My base pressure is set to 10. All I know is that since switching from the auto-cpap mode my rera's have been very low.
Hi car54,
What were the settings when on APAP mode?
RE: Flow Limitation/UARS and BiPAP - car54 - 07-22-2014
(07-21-2014, 10:30 PM)vsheline Wrote:10 was the low and 13 was the high. Nothing more then straight apap. Anything above 13 seemed to leak which interrupted my sleep.(07-21-2014, 07:20 PM)car54 Wrote: I have a Remstar auto A flex by PR. It is in cpap-check mode with the C-flex + feature which reduces the pressure while exhaling.
There are 3 degrees of pressure relief in the C-flex feature and I have it at #1. My base pressure is set to 10. All I know is that since switching from the auto-cpap mode my rera's have been very low.
Hi car54,
What were the settings when on APAP mode?
It is only through sites like this and playing with my settings that my results have improved.
RE: Flow Limitation/UARS and BiPAP - car54 - 07-22-2014
Before switching to Aflex my apneas and hypopneas were low but my rera's could be up to 40 a night. Last night I had no apneas or hypopnea and only 5 rera's. The Aflex pressure is set at 10 but it has a range between 7 and 13.
Brad
RE: Flow Limitation/UARS and BiPAP - Sleepster - 07-22-2014
(07-22-2014, 05:16 AM)car54 Wrote: The Aflex pressure is set at 10 but it has a range between 7 and 13.
Hi Brad,
The A-Flex setting can be 1, 2, or 3. That's a comfort setting and is of secondary importance.
The pressure range is more important, and it sounds like you have a minimum of 7 and a maximum of 13. But I don't understand your reference to 10.
RE: Flow Limitation/UARS and BiPAP - car54 - 07-22-2014
(07-22-2014, 11:26 AM)Sleepster Wrote:10 is what the machine is set to, but on the sleepy head software it shows a range from 7 to 13(07-22-2014, 05:16 AM)car54 Wrote: The Aflex pressure is set at 10 but it has a range between 7 and 13.
Hi Brad,
The A-Flex setting can be 1, 2, or 3. That's a comfort setting and is of secondary importance.
The pressure range is more important, and it sounds like you have a minimum of 7 and a maximum of 13. But I don't understand your reference to 10.
RE: Flow Limitation/UARS and BiPAP - Sleepster - 07-22-2014
(07-22-2014, 12:05 PM)car54 Wrote: 10 is what the machine is set to, but on the sleepy head software it shows a range from 7 to 13
Hmmm... That's weird. Which PR System One do you have?
http://www.apneaboard.com/forums/Thread-How-to-Identifying-My-CPAP-Machine
RE: Flow Limitation/UARS and BiPAP - car54 - 07-23-2014
(07-22-2014, 05:35 PM)Sleepster Wrote:(07-22-2014, 12:05 PM)car54 Wrote: 10 is what the machine is set to, but on the sleepy head software it shows a range from 7 to 13
Hmmm... That's weird. Which PR System One do you have?
#560 series 60 remstar auto
RE: Flow Limitation/UARS and BiPAP - robysue - 07-23-2014
(07-22-2014, 12:05 PM)car54 Wrote:(07-22-2014, 11:26 AM)Sleepster Wrote: The pressure range is more important, and it sounds like you have a minimum of 7 and a maximum of 13. But I don't understand your reference to 10.10 is what the machine is set to, but on the sleepy head software it shows a range from 7 to 13
and
(07-23-2014, 04:42 AM)car54 Wrote:(07-22-2014, 05:35 PM)Sleepster Wrote:(07-22-2014, 12:05 PM)car54 Wrote: 10 is what the machine is set to, but on the sleepy head software it shows a range from 7 to 13
Hmmm... That's weird. Which PR System One do you have?
#560 series 60 remstar auto
car54,
Which version of SH are you using? And what kind of a computer are you using? And where in the SH program are you seeing the pressure settings being reported as 7-13? In the statistics page or in the daily data pages?
And what do the daily data pressure graphs look like?
Finally, can you confirm what your PR System One Series 60 APAP's therapeutic settings actually are? Go into the clinical menu and find the following settings:
- Min Pressure
Max Pressure
Also, are you using the RAMP at all? If so, you also need to look at the Starting Ramp Pressure setting.
Once we have all that information, I may be able to help you figure out what's going on in the SH reports.