+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: Newbie Intro (/Thread-Newbie-Intro--29512)
RE: Newbie Intro - SarcasticDave94 - 07-14-2020
Ramp is sort of like the highway trip, once you've started the trip you don't need entrance/exit ramps. I do see the 90% and where you're at 8, so yes my earlier post at 6 was a bit low. But it sounds like you're getting the hang of PAP therapy pretty well. Congrats and keep at it.
RE: Newbie Intro - EngineerBoo - 07-14-2020
Thanks, y'all...I really appreciate it. So I assume it's normal to have thoughts of wondering if you'd die if the electricity goes out while asleep on the machine? Or if anyone has ever had a lung burst by high-pressure? Or sleeping through your alarm because all you hear is your breathing?
RE: Newbie Intro - Sleeprider - 07-14-2020
What’s an alarm?
RE: Newbie Intro - SarcasticDave94 - 07-14-2020
After I got my ASV, every time I hit Snooze the machine turns off.
Lung bursting PSI? Nah, as PAPs that go to 25 cmH2O equals 0.355584 PSI.
Depending on the mask, full face ones have an anti-asphyxiation valve, typically in the elbow on the front. Other masks, your natural survival instinct to breathe, will either wake you up or you may switch to mouth breathing.
RE: Newbie Intro - jaswilliams - 07-14-2020
The pressure is so low it won’t blow up a balloon so certainly won’t burst a lung
RE: Newbie Intro - Gideon - 07-14-2020
You understand the pressures we deal with I often ask for you to do an experiment.
Get a tall glass is water, and a straw. Now the hard part, put the straw in to near the bottom and pretend you are a kid again and blow bubbles. Assuming 8 inches of water you just experienced the maximum pressure a CPAP is capable of, 20 cmw. Did you have any problems?
Didn't think so.
RE: Newbie Intro - EngineerBoo - 07-15-2020
So, last night, I was able to get a full nights' sleep for the first time...got 7.42 hrs and had dreams! I reset the low pressure up from 6 to 8 and didn't like it, at first, but after a bit it was okay.
My numbers changed from the first night...AHI was 3.8, 90% pressure is 11.7, min pressure 8.0, max pressure 15.0.
I did have a slight headache when I woke up and my throat was dry. I looked in the water reservoir and it doesn't even look halfway empty so should I raise up the humidity level?
I've rarely slept on my back, before, because the snoring goes into hypermode but I woke up a few times lying on my back and my wife reported she didn't hear any snoring from me. (And she's a very light sleeper)
Is it normal to feel a little air blowing out of the hose on top of the head and the front of the mask? The app says mask fit 100%. Also, I changed the max pressure to 15 from 20 yesterday but since it did go up to 15 last night should I put that max back up? (The change didn't wake me up last night, which is a good thing.)
I do feel well rested and not as groggy as I usually do...I may get to like this weird little contraption!!
RE: Newbie Intro - SarcasticDave94 - 07-15-2020
On the humidity setting: you'll have to experiment a bit with the settings. You can try going up to see if it helps. If it doesn't try lower than it is set to now. It seems each individual reacts differently to the humidity.
On air coming out in front of the mask: there are built-in vents that release a certain amount of air at all times, and more when you exhale. The reason you didn't record leaks is that there's a certain amount that is deducted from the total leak as allowable/expected.
RE: Newbie Intro - Sleeprider - 07-15-2020
As you adapt to the higher starting pressure you will come to find it comfortable. It takes some time, but you will adapt and look forward to how it keeps your airway open for breathing. A higher minimum pressure results in less pressure variation through the night and less disruption to your sleep. The mask incorporates intentional vents that prevent you from rebreathing expired air and CO2. Some vents are quieter than others, but it is an essential function.
Humidity needs vary, and if you describe your humidity setting we can help you make adjustments. The automatic climate or humidity control provides much less humidity than manual settings.
RE: Newbie Intro - EngineerBoo - 07-15-2020
Thanks....I got the manual out and found how to change the humidity....it was set on 3 and goes up to 5 so will try 4 tonight. Our high-altitude does tend to be very arid so that's not surprising.
I downloaded the Oscar software on here onto my laptop and got it setup but, for some reason, my SSDD card reader isn't letting it import data from the machine. My machine also has Bluetooth and so does my laptop so I will try download the card data onto the laptop. (Any tips for that?) My laptop is old so doesn't have a card reader so I have to use one that plugs into a USB port (but the light is on...not sure why the laptop isn't letting me see it.)