+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Software Support Forum (https://www.apneaboard.com/forums/Forum-Software-Support-Forum)
+--- Thread: SD Cards - backup [SOLVED] Post 11 (/Thread-SD-Cards-backup-SOLVED-Post-11)
RE: SD Cards - backup [SOLVED] Post 11 - Jeff8356 - 12-07-2022
(12-07-2022, 12:31 PM)ApneaticBill Wrote: Thank you.. I ran the process of File Preferences and checked the Import w/o asking for confirmation.
Go back and uncheck that box in preferences. Quit OSCAR, then restart. The window that has the "Specify" button should return.
RE: SD Cards - backup [SOLVED] Post 11 - Crimson Nape - 12-07-2022
You should validate the Time and Date setting on your AC10 too.
- Red
RE: SD Cards - backup [SOLVED] Post 11 - ApneaticBill - 12-07-2022
Thank you Red.. The time and date were updated two days ago.. At least that's done
RE: SD Cards - backup [SOLVED] Post 11 - ApneaticBill - 12-07-2022
That did not work..
However, I did notice something(s)
1. Red suggested going to file/preferences and checking the box 'import w/o asking....' There is no "preferences" under File.. Rather under OSCAR.. Thats where I went..
2. Upon rechecking.. I think this may be the issue?? UnderMemory and Startup Options.. there are 7 boxes to check
One of them that is checked is Automatically load last used profile on start-up.
Should that be unchecked while doing this new import?
What boxes do you recommend checking on that entire page? Currently, Automatically load last...; Warn when Importing....; Warn when previously unseen... are checked under the Import tab.
RE: SD Cards - backup [SOLVED] Post 11 - Jeff8356 - 12-07-2022
Bill,
You are correct sir. The preferences are under OSCAR > Preferences, also by using Command + , (command + comma).
Try these settings and see if you get that screen back with "Specify" when doing an import:
[attachment=46239]
Don't forget to quit OSCAR and restart.
The other settings on that page regarding compression are up to you. They are not necessary but will usually make the OSCAR data files a little smaller on your computer.
RE: SD Cards - backup [SOLVED] Post 11 - ApneaticBill - 12-07-2022
Dang.. didn't work.. I have to say.. maybe a multiple time.. THANK YOU for sticking with me.
If you could access my computer like Apple can it would likely be done in a flash..
But.. Still no popup box
RE: SD Cards - backup [SOLVED] Post 11 - Jeff8356 - 12-07-2022
Ok, lets try this....
- Quit OSCAR and any other apps
- Eject the SD card and remove it from your Mac
- Reboot and login again
- Insert the SD card back into your Mac
- Open Finder and verify the SD card is showing up in the left pane
- Open OSCAR and try to import again
RE: SD Cards - backup [SOLVED] Post 11 - ApneaticBill - 12-07-2022
This is what I get... You can see it shows last nite
RE: SD Cards - backup [SOLVED] Post 11 - Jeff8356 - 12-07-2022
And what happens if you click on the profile and select "Open Profile" (you can also double click the profile)...
RE: SD Cards - backup [SOLVED] Post 11 - ApneaticBill - 12-07-2022
Tried that earlier.. still shows only the old data I showed earlier..
Time for you to get some rest friend.. I've worn you out.
Bill