+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: [Pressure] VINEDIGGER - Therapy Thread (/Thread-Pressure-VINEDIGGER-Therapy-Thread)
RE: VINEDIGGER - Therapy Thread - VINEDIGGER - 06-27-2024
(06-27-2024, 06:03 PM)SarcasticDave94 Wrote: Well, you've gotten the International equal to the US ST-A it seems. Most of these modes will probably be over the top for you, S being I think closest.
If this is true, you'll have I think static EPAP and IPAP, somewhat like ST which is probably not ideal.
It has the S Mode. Which has:
Ipap
Epap
Ti max
Ti min
Rise time
Trigger
Cycle
It should work as a fixed bipap which is ideal for me since on my resmed airsense i used to have fixed cpap epr 3 with no events.
i wake up not rested, brain fog and tired all day. Only flow limitations. I bought this one to treat my flow limitations with fixed bipap mode. Since i cannot find aircurve vauto anywhere.
RE: VINEDIGGER - Therapy Thread - VINEDIGGER - 06-27-2024
(06-27-2024, 06:15 PM)Crimson Nape Wrote: Where did your last screenshot come from? I was basing my last post on that image. That image clearly states it is a Resmed AirSense 10 Autoset.
- Red
In post #18 i showed my lumis 150 st settings and results from last night sleep. In post #19 i showed what my airsense 10 settings were, as a reference to who can mimic those sittings on to lumis 150.
The lumis has
Ipap
Epap
Ti max
Ti min
Rise time
Trigger
Cycle
I am wondering about the ti max, ti min, rise time, cycle? I know trigger must be high or very high for centrals. But the other settings are new to me and i needed help.
RE: VINEDIGGER - Therapy Thread - PeaceLoveAndPizza - 06-27-2024
Leave rise time at the default. In fact, I think you should do a complete factory reset so you are starting from a known condition. Once that is down, make the changes as recommended and let us know how it goes.
Be careful changing settings. This machine has many tweaks that could be a problem if changed without understanding the impact.
RE: VINEDIGGER - Therapy Thread - VINEDIGGER - 06-27-2024
(06-27-2024, 06:36 PM)PeaceLoveAndPizza Wrote: Leave rise time at the default. In fact, I think you should do a complete factory reset so you are starting from a known condition. Once that is down, make the changes as recommended and let us know how it goes.
Be careful changing settings. This machine has many tweaks that could be a problem if changed without understanding the impact.
The rise time smooths the pressure change as this machine does not have easybreath. I already wiped the memory and set it to the default settings. I will try your suggestions on pressure and thank you so much.
RE: VINEDIGGER - Therapy Thread - PeaceLoveAndPizza - 06-27-2024
You are welcome to change whatever you want, it’s your machine. You asked for advice, it does not bother me if you choose to ignore it.
RE: VINEDIGGER - Therapy Thread - SarcasticDave94 - 06-27-2024
Info had been good thus far, Trigger High or Very High regarding Centrals is correct.
RE: VINEDIGGER - Therapy Thread - VINEDIGGER - 06-27-2024
(06-27-2024, 06:51 PM)PeaceLoveAndPizza Wrote: You are welcome to change whatever you want, it’s your machine. You asked for advice, it does not bother me if you choose to ignore it.
You have been very kind thank you. I will try your settings.
RE: VINEDIGGER - Therapy Thread - VINEDIGGER - 06-28-2024
this is the data from last night
too much hypopneas
weird breathing pattern sometimes at night
IPAP 12.4
EPAP 8
PS 4.4
should I raise EPAP with PS 4 ? or more PS ?
RE: VINEDIGGER - Therapy Thread - PeaceLoveAndPizza - 06-28-2024
One data point is not sufficient to determine a trend.
Try raising EPAP min to 9 and IPAP max to 13. Use that for a few days and let us know how it looks.