[Equipment] Is the Airfit P10 compatible with Resmed S8 lightweight?

[Equipment] Is the Airfit P10 compatible with Resmed S8 lightweight? - Printable Version

+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: [Equipment] Is the Airfit P10 compatible with Resmed S8 lightweight? (/Thread-Equipment-Is-the-Airfit-P10-compatible-with-Resmed-S8-lightweight)

Is the Airfit P10 compatible with Resmed S8 lightweight? - HangOver - 08-12-2015

I have a Resmed S8 lightweight and wanted to try the Airfit P10 does anyone have this combination I am trying to find out if the P10 will fit and work OK.

The S8 is discontinued there is no info on the Resmed site.

RE: Is the Airfit P10 compatible with Resmed S8 lightweight? - trish6hundred - 08-12-2015

Hi HangOver,
WELCOME! to the forum.!
You should be able to use the P10 with your machine, just change the mask setting from nasal mask to the pillows mask setting.
Hang in there for more responses to your post and much success to you with your CPAP therapy.

RE: Is the Airfit P10 compatible with Resmed S8 lightweight? - Riven - 08-12-2015

(08-12-2015, 07:55 AM)HangOver Wrote: I have a Resmed S8 lightweight and wanted to try the Airfit P10 does anyone have this combination I am trying to find out if the P10 will fit and work OK.

The S8 is discontinued there is no info on the Resmed site.

I have used the AirFit P10 with my old backup S8 Elite ll a few times. I have used the SWIFT and STANDARD settings and the results seem about the same. The S8 Lightweight is, I believe, the same as the S8 Escape and may not have the mask setting options.

There is a good mask compatibility List on the internet. Search for "ResMed MASK/DEVICE Compatibility List". For the S8 Escape it says "No settings required. Consult your clinician before changing to a different mask type."

Hope this helps.

RE: Is the Airfit P10 compatible with Resmed S8 lightweight? - HangOver - 08-12-2015

Thanks for the suggestions.
Thought I'd do an update in case anyone else searches this...

I called Resmed support today and they confirmed it will fit the S8 lightweight.[/align]

I did look on the chart previously but as you mentioned it's not listed.

All Good :-)

RE: Is the Airfit P10 compatible with Resmed S8 lightweight? - Basz - 04-17-2016

I just got the ResMed S8 Elite as a back up. According to the ResMed Mask/Device recommendations it calls for MIR FULL across the board for all mask. I use the P10 and will give that setting a try. Just curious if anyone with same gear has found?