+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: Settings? AirSense 10 AutoSet (/Thread-Settings-AirSense-10-AutoSet)
Settings? AirSense 10 AutoSet - daveasu - 09-10-2015
Hello All,
I have an AirSense 10 AutoSet that started out great a few months ago, but now it seems that I am getting worse results.
Some data is below......Any suggestions?
9/9/2015 Device: AirSense 10 AutoSet
Device Settings
Therapy Mode: AutoSet EPR: FULL_TIME EPR Level: 2.0 cmH2O
EPR Enable: OFF EPR Patient Enable: OFF Ramp Enable: AUTO
Ramp Time: 20.0 Minutes Essentials: ON Minimum Pressure: 4.0 cmH2O
Maximum Pressure: 16.0 cmH2O
Pressure - cmH2O
Median: 10.7 95th Percentile: 13.9 Maximum: 16.0
Leak - L/min
Median: 0.0 95th Percentile: 9.6 Maximum: 43.2
Respiratory Indices - events/hr
Apnea Index: 8.1 Hypopnea Index: 4.4 AHI: 12.5
Obstructive: 5.5 Central: 2.5 Unknown: 0.0
% Time in CSR: 0.0
Settings Data: 1drv.ms/1XRgiZO
(you may have to download the image to zoom in)
Thank you for your help!
RE: Settings? AirSense 10 AutoSet - AlanE - 09-10-2015
Your profile says your pressure is 9-16 but what you copied shows "Minimum Pressure: 4.0 cmH2O"
If your Min is really 4, that tends to be very low for a lot of people.
Are you using Sleepyhead software?
RE: Settings? AirSense 10 AutoSet - daveasu - 09-10-2015
Yes, I do have Sleepyhead.
RE: Settings? AirSense 10 AutoSet - OpalRose - 09-10-2015
daveasu,
In another thread, you stated you really like the ramp, so I won't ask you to turn it off, but from the information in your post above, it looks like you have it starting at 4 for 20 minutes.
Try starting the ramp at a pressure of 7 for 15 minutes. This way, you are closer to your starting pressure of 9 once ramp is finished.
When you reach at least 8 posts, try downloading sleepyhead so we can see the graphs and better see what is going on.
RE: Settings? AirSense 10 AutoSet - AlanE - 09-11-2015
Check the clinician menu and see if minimum is still set to 9.
In case you don't know how to access the clinician menu:
![[Image: A10-pic1.jpg]](http://www.apneaboard.com/A10-pic1.jpg)
RE: Settings? AirSense 10 AutoSet - zonk - 09-11-2015
(09-10-2015, 06:18 PM)daveasu Wrote: Essentials: ONChange "Essentials" to "Plus" so you can view more data and the "period" in the sleep report, just below "More Info" to 1 day
Every time, you unplug the machine, the period changes to 1 month
Both median and 95th percentile numbers are excellent but max 43 L/m is on the high side, not a problem as its only for a short time
Pressure wise, the pressure max out but cannot say from the numbers alone without detailed data graphs, whether need to raise a bit
The last we want increase CA events, just to keep up with flow limitation
RE: Settings? AirSense 10 AutoSet - daveasu - 09-12-2015
Hi Zonk!
Got these 2 changes made:
Change "Essentials" to "Plus" so you can view more data and the "period" in the sleep report, just below "More Info" to 1 day
Thank you!
(09-11-2015, 01:07 PM)AlanE Wrote: Check the clinician menu and see if minimum is still set to 9.
In case you don't know how to access the clinician menu:
Hi Alan!
I changed the minimum to 9. I ordered this machine from one of the CPAP websites, and when it came in, it was only set to factory defaults. That was one I overlooked.
Thank you!
RE: Settings? AirSense 10 AutoSet - AlanE - 09-12-2015
Nice. Lets hope tonight is a better night for you.
RE: Settings? AirSense 10 AutoSet - daveasu - 09-15-2015
(09-12-2015, 03:06 PM)AlanE Wrote: Nice. Lets hope tonight is a better night for you.
AlanE,
Thank you for the suggestions!
The last few nights have been much better.
My AHIs were still above 5 last night.
http://1drv.ms/1OUY7fP
I had a mask that seemed to be leaking all night....
Fixed the link for you. Also check out the How-To for Attachments and Inserting Images. -Moderator