Apnea Board Forum - CPAP | Sleep Apnea
Resmed AirSense 10, humidifier discoloring on bottom? - Printable Version

+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: Resmed AirSense 10, humidifier discoloring on bottom? (/Thread-Resmed-AirSense-10-humidifier-discoloring-on-bottom)

Pages: 1 2 3 4

Resmed AirSense 10, humidifier discoloring on bottom? - Jackie1 - 01-05-2016

Anyone have this issue? Brand new machine, and using only distilled water.

RE: Resmed AirSense 10, humidifier discoloring on bottom? - Sleeprider - 01-05-2016

More details. Is it a film you can remove, or plastic changing color? Have you run it dry? Put it in a dishwasher? Explain your care routine.

RE: Resmed AirSense 10, humidifier discoloring on bottom? - Jackie1 - 01-05-2016

(01-05-2016, 06:33 PM)Sleeprider Wrote: More details. Is it a film you can remove, or plastic changing color? Have you run it dry? Put it in a dishwasher? Explain your care routine.

Machine is about 2 months old. Distilled water only, a discoloration on the buttom of the tank. Haven't run it dry I don't think. Have never put in dishwasher. I thought i read a post a while ago that said resmed had an issue with this, and now can't find it.

EDIT, found the other post:

[link to commercial DME forum removed]



-----
Moderator Action: Link Removed
To maintain our status as an educational organization, the only commercial links allowed in this forum are to CPAP-related manufacturer websites. This is stated in the Apnea Board Rules with details given in the Commercial Links Policy section.
-----

RE: Resmed AirSense 10, humidifier discoloring on bottom? - player - 01-06-2016

Is it the metal where the water goes in? Or is it underneath?

Do you empty the tank out everyday or top it up?



RE: Resmed AirSense 10, humidifier discoloring on bottom? - Jim Bronson - 01-06-2016

Pix would help. I've had mine for more than a year, and never had a bit of discoloration.

RE: Resmed AirSense 10, humidifier discoloring on bottom? - Jackie1 - 01-06-2016

(01-06-2016, 11:00 AM)Jim Bronson Wrote: Pix would help. I've had mine for more than a year, and never had a bit of discoloration.

Here. I usually top off every day with new distilled water.

Pic below
http://s28.postimg.org/fkxa60n4t/image.jpg

To see the 10 page post about this issue, go here and click the FIRST result:

https://www.google.com/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#q=resmed%20humidifier%20discolor


RE: Resmed AirSense 10, humidifier discoloring on bottom? - OpalRose - 01-06-2016

Well, clicking on first article brings us right back here.

Your pic looks like a burn mark.


RE: Resmed AirSense 10, humidifier discoloring on bottom? - DariaVader - 01-06-2016

maybe she meant http://www.apneaboard.com/forums/Thread-Airsense-10-humidifier although it is only 3 pages of comments... I seem to remember others complaining about this

RE: Resmed AirSense 10, humidifier discoloring on bottom? - Sleeprider - 01-06-2016

Jackie, this looks like the kind of discoloration that occurs with "tempering", which is moderate heating of metal. It indicates the metal plate got hot enough to cause the discoloration. This can occur most often when the tank is dry and the heater is on. The discoloration is harmless and is small enough I wouldn't worry about it. If it increases in size, you might want to ask your DME to have the humidifier thermostat that regulates the heat element under the humidifier container checked. Temperatures that metal has been exposed to can be estimated by the tempering color: See image below.

[Image: steel_tempering_colour_chart.png]

[Image: image.jpg]

RE: Resmed AirSense 10, humidifier discoloring on bottom? - OpalRose - 01-06-2016

Jackie1,
Have you tried to get the tank replaced? That is what I would do. If your DME is not helpful, call ResMed and see what they say about it.

It may also be a defect with machine itself. Worth checking into.