+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: [Pressure] ASV AirCurve 10 helpless with interpration (/Thread-Pressure-ASV-AirCurve-10-helpless-with-interpration)
ASV AirCurve 10 helpless with interpration - Morphin - 04-13-2016
First Thank you for such a great forum. I have just started reading and reading, but I would like understand the graph of my ASV treatment....
I have a complex apnoe. (weight 190pound, height 173cm, Age 46) My previous treatment with a resmed AirSense 10 AutoSet did not help (I had also still more than 10 AHI and if I remember correctly at a pressure of 12).
So I changed to ASV (Resmed) with ASVAuto-Setting and
Min EPAP: 5.2
Max EPAP: 12
Min PS: 3
Max PS: 15
->The technical person told me that the maximum pressure (Max IPAP 27) is too high (For my age and therapy). Why?
I had only a short night and after waking up I have difficulties to fall asleep again, but when I'm sleeping the sleep is now much better. So what I would like is to sleep more(Longer) of if I wake up the I would like to fall asleep again more easily.....
Any recommendation to adjust what and on which direction?
Thank's for every input, explanation and help
Andy
[attachment=2356]Hi
RE: ASV AirCurve 10 helpless with interpration - Morphin - 04-13-2016
o.k. I see that the picture is not good. Let me upload it somewhere...
RE: ASV AirCurve 10 helpless with interpration - justMongo - 04-13-2016
Try imgur.
Your EPAP wanders from 5.2 to 12 to treat obstructive apnea.
The IPAP spikes up to ventilate you during a central event. So, your max pressure can reach 12+15=27.
That's sounds high; but, I do not know why it would be considered too high for your age and therapy.
From what I could see on the low-res image, it appears the therapy is effective.
How were your settings determined? By a sleep study where they adjusted parameters while you slept?
RE: ASV AirCurve 10 helpless with interpration - Morphin - 04-13-2016
Hmm
Any idea how to post pictures?
"
•You cannot post clickable links to this forum threads and posts. Minimum post count is 8 posts. But your post count is just 2 posts.
•You are not allowed to post images in this forum."
(04-13-2016, 09:05 AM)justMongo Wrote: Try imgur.
Your EPAP wanders from 5.2 to 12 to treat obstructive apnea.
The IPAP spikes up to ventilate you during a central event. So, your max pressure can reach 12+15=27.
That's sounds high; but, I do not know why it would be considered too high for your age and therapy.
From what I could see on the low-res image, it appears the therapy is effective.
How were your settings determined? By a sleep study where they adjusted parameters while you slept?
I have a sleep study 8 years ago with a CPAP device (I have seen that the pressure was from 5-12)...
Thanks'
Andy
RE: ASV AirCurve 10 helpless with interpration - FrankNichols - 04-13-2016
I use Imagebin others use imager, either way you post a link supplied from the site and the image is displayed inline.
RE: ASV AirCurve 10 helpless with interpration - justMongo - 04-13-2016
Morphin is correct. One can only do an a cpap related attachment until 8 posts are made.
Then a link to an image hosting site link imgur or photobucket can be used.
I forgot about that limit -- it's to help limit forum SPAM.
Member grades and privileges are explained here: http://www.apneaboard.com/forums/Thread-Membership-Levels-explained
Paula explains here how to link to an image hosted on another server:
http://www.apneaboard.com/forums/Thread-How-to-Inserting-an-Image
RE: ASV AirCurve 10 helpless with interpration - Morphin - 04-13-2016
Thanks' for the explanation. I will post more info about me....:-)
RE: ASV AirCurve 10 helpless with interpration - trish6hundred - 04-13-2016
Hi Morphin,
WELCOME! to the forum.!!
Hang in there for more responses to your post and good luck getting your machine fine-tuned to meet your needs.
Much success to you.
RE: ASV AirCurve 10 helpless with interpration - Morphin - 04-15-2016
(04-13-2016, 04:31 PM)trish6hundred Wrote: Hi Morphin,
WELCOME! to the forum.!!
Hang in there for more responses to your post and good luck getting your machine fine-tuned to meet your needs.
Much success to you.
THank's
I will post a few other post until I can post links to pictures. But last night was the longest Time I ever sleeped with the mask
Channel Min Med 95% Max
EPAPExpiratory Pressure (cmH2O)
W-Avg: 8.71 4.08 8.20 12.62 14.76
IPAPInspiratory Pressure (cmH2O)
W-Avg: 13.78 4.32 13.12 20.88 25.00
Minute Vent.Amount of air displaced per minute (L/min)
W-Avg: 5.49 1.12 5.38 7.00 16.12
Resp. RateRate of breaths per minute (Breaths/min)
W-Avg: 11.30 0.00 11.60 14.20 22.60
Flow Limit.Graph showing severity of flow limitations (Severity (0-1))
W-Avg: 0.01 0.00 0.00 0.00 1.00
Leak RateRate of detected mask leakage (L/min)
W-Avg: 0.39 0.00 0.00 2.40 15.60
SnoreGraph displaying snore volume (?)
W-Avg: 0.02 0.00 0.00 0.00 3.62
Insp. TimeTime taken to breathe in (Seconds)
W-Avg: 2.39 0.12 2.18 3.74 12.62
Exp. TimeTime taken to breathe out (Seconds)
W-Avg: 2.97 0.52 2.88 4.24 6.94
Target Vent.Target Minute Ventilation? (L/min)
W-Avg: 5.02 4.00 5.00 5.62 6.38
Tidal VolumeAmount of air displaced per breath (ml)
W-Avg: 494.35 0.00 460.00 740.00 1820.00
Total time in apnea 00:05:17
Time over leak redline 0.000%
Machine Settings
ModeCPAP Mode ASVAuto
Min EPAPLower Expiratory Pressure 5.40 cmH2O
Max EPAPHigher Expiratory Pressure 15.00 cmH2O
Min IPAPLower Inspiratory Pressure 8.40 cmH2O
Max IPAPHigher Inspiratory Pressure 30.00 cmH2O
PS MinPressure Support Minimum 3.00 cmH2O
PS MaxPressure Support Maximum 15.00 cmH2O
Antibacterial FilterAntibacterial Filter No
Climate ControlClimate Control Manual
Humidifier StatusHumidifier Enabled Status On
Humidity LevelHumidity Level 4
MaskResMed Mask Setting Pillows
Patient AccessPatient Access Yes
RampRamp Enable Off
Smart StartMachine auto starts by breathing Off
TemperatureClimateLine Temperature 27 ºC
Temperature EnableClimateLine Temperature Enable 2
RE: ASV AirCurve 10 helpless with interpration - Morphin - 04-15-2016
My sleep is much better. Nevertheless I think there is room for improvments. Or maybe I have to accustom to this settings?
THank's
Andy