+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: AirCurve 10 / AirSense 10: Leak Alert and SmartStart are mutually exclusive (/Thread-AirCurve-10-AirSense-10-Leak-Alert-and-SmartStart-are-mutually-exclusive)
AirCurve 10 / AirSense 10: Leak Alert and SmartStart are mutually exclusive - SuperSleeper - 08-01-2016
Putting this in a new thread for others who might be interested in this tidbit... on the ResMed AirSense & AirCurve 10 units, you can't use both the Leak Alert and SmartStart features at the same time. From icyura10's post HERE, here's some instructions:
icyura10 Wrote:1) get into Clinical Mode (hold down the selector button and the home button for 5-8 seconds)
2) select settings
3) you can either have the Leak Alert Or SmartStart on.. but only one, they are mutually exclusive - So Choose your poison er I mean pleasure.
4) scroll to the top of the list to the Home selection
5) exit out of clinical mode and your all done!
and also some info from a kind member's email:
Quote:In the clinician menu, under Options, if Leak Alert is enabled, SmartStart is "greyed out."
Turn Leak Alert off, and SmartStart becomes active in the menu and you can enable it.