+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: NOTICE: New Clinician Manuals NOW AVAILABLE (/Thread-NOTICE-New-Clinician-Manuals-NOW-AVAILABLE)
New Clinician Manuals NOW AVAILABLE - SuperSleeper - 02-25-2012
.
SuperSleeper Wrote:NOTE: This thread contains a history of updates to our CPAP Clinician Setup Manual Page
Recent changes or additions are noted near the end of this thread. There will also be a date stamp near the bottom of our CPAP Clinician Setup Manual Page indicating when the most recent updates were made.
(please note that this thread contains updates made after March 1, 2012, when we moved our forums to our new home here).
Thanks to a kind Apnea Board member, we now have the Clinician Setup Guide for the following machine:
DeVilbiss Horizon LT 8000 series (older pre-1999 unit)
Note: this older CPAP will require a manometer in order to adjust pressures.
The setup guide is available via direct download on our Clinician Setup Manual Page:
http://www.apneaboard.com/adjust-cpap-pressure/change-cpap-pressure-settings-adjusting-your-machine-with-a-clinician-setup-manual
.
RE: New Clinician Manuals NOW AVAILABLE - SuperSleeper - 04-04-2012
Thanks to one of our Master Members we now have the following Clinician Setup Manuals available on our Clinician Manuals Page by Clicking HERE and following the directions:
1. DeVilbiss IntelliPAP Bilevel and SleepCube Bilevel (combined manual)
2. Respironics PR System One BiPAP Pro with Bi-Flex
3. Respironics PR System One BiPAP AutoSV Advanced
We also have an updated and expanded version of the following manual:
4. Fisher & Paykel ICON Auto, ICON Premo & ICON Novo (combined manual)
These are all available via email by following the directions on our Clinician Manuals Page.
RE: New Clinician Manuals NOW AVAILABLE - SuperSleeper - 05-01-2012
We now have the following Clinician Setup Guide available via email request (by following the instructions on our Clinician Setup Manual Page, HERE):
Respironics PR System One 60 Series REMstar Auto with A-flex
Please note: this manual is almost identical to the older PR System One REMstar Auto manual, with the addition of a small amount of information regarding the heated hose/humidifier system that's designed for the Series 60 machines.
Thanks to greatunclebill & Jenny for making this available!
RE: New Clinician Manuals NOW AVAILABLE - SuperSleeper - 06-21-2012
Thanks to a thoughtful Apnea Board member, we now have the instructions for changing pressure on the following CPAP machine:
Invacare Polaris LT
Instructions are posted on our CPAP Clinician Manual Page HERE.
RE: New Clinician Manuals NOW AVAILABLE - SuperSleeper - 07-03-2012
Thanks to kind person, we now have the following Clinician Setup Manual available for the following CPAP machine:
Puritan Bennett Sandman Duo & Duo ST (combined manual)
If you would like a copy of this manual, please follow the instructions for obtaining manuals via email on our CPAP Clinician Manual Page HERE.
RE: New Clinician Manuals NOW AVAILABLE - SuperSleeper - 07-23-2012
Thanks to Master Member mjbearit for the following info on changing pressures on the ResMed Sullivan V Elite CPAP machine.... the full clinician manual is also available via email on our CPAP Clinician Manual Page.
Please note that you will need a manometer to adjust pressures properly on this older machine.
Directions for Sullivan V Elite:
1. Plug your Sullivan V Elite CPAP machine into a regular wall outlet.
2. Set up the Sullivan V Elite with all of the accessories that you or the patient for whom you care uses; make sure to use the same mask that's used for actual treatment.
3. Flip the main power switch in the rear of the unit on and allow the machine to warm up for 15 minutes; press the stop button if the motor begins to run.
4. Insert the Luer taper into one end of the tubing and attach the other end to the manometer.
5. Remove the plug from one of the ports on the frame of your mask and insert the Luer taper end of the tubing into the port.
6. Turn the CPAP machine off.
7. Turn the main power switch on again while holding down the "Start," "5 minute" and "10 minute" buttons on the front console until all three buttons light up.
8. Block the flow of air to the mask, either with your hand or by attaching a blind bubble. Note that a blind bubble will not work with a "Mirage" type mask.
9. Press the "Stop" and "20 minutes" buttons together and then release them to start the motor and build up pressure.
10. Decrease the pressure as necessary by using the "5 minute" button or increase it with the "10 minute" button until the manometer reads "16 +/- 0.2 cm H20" for normal use or any other reading prescribed by your doctor or respiratory therapist.
11. Turn your CPAP machine off with the main power switch or press the "Stop" button to put it in regular use mode.
RE: New Clinician Manuals NOW AVAILABLE - SuperSleeper - 07-23-2012
Thanks to Master Member Zonk, the link to directions for entering the Clinician Setup Menu of the following CPAP machine have been posted on our CPAP Clinician Manual Page, HERE.
Respironics Solo LX
RE: New Clinician Manuals NOW AVAILABLE - SuperSleeper - 07-23-2012
Thanks to Apnea Board member Laurence, the following Clinician Setup Manual is now available via email by following the directions on our CPAP Clinician Manual Page, HERE:
Respironics BiPAP AutoSV Advanced
(note: this is the older unit, not the newer PR System One model)
RE: New Clinician Manuals NOW AVAILABLE - SuperSleeper - 09-25-2012
Thanks to Apnea Board member fluke, we now have the following Clinician Setup Manual available for the following CPAP machine:
Respironics PR System One 60 Series REMstar Pro with C-flex+
If you would like a copy of this manual, please follow the instructions for obtaining manuals via email on our CPAP Clinician Manual Page HERE.
Thanks fluke!
RE: New Clinician Manuals NOW AVAILABLE - SuperSleeper - 11-26-2012
Thanks to Eugene & one of our great Master Members, we now have the Clinician Setup Guide & Manuals for the following CPAP machines:
InnoMed-Aire CPAP (Setup Guide only)
3B Products RESmart CPAP & Auto-CPAP (combined manual)
ResMed Stellar 100 Invasive & Noninvasive Ventilator
ResMed S9 VPAP ST-A
Thanks to these folks for helping to keep our inventory of CPAP Setup Manuals up-to-date!
As always, if you'd like one of these manuals, please follow the procedures on our Clinician Setup Manuals Page.
