P10 & Dreamstation - Printable Version +- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums) +-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area) +--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum) +--- Thread: P10 & Dreamstation (/Thread-P10-Dreamstation)

P10 & Dreamstation - rouxster - 06-21-2017 I'm using the Dreamstation and I just switched to the P!0 from the Amara View.  Do I need to change any settings on the Dreamstation? RE: P10 & Dreamstation - Marillion - 06-21-2017 Yes. The P10 is a Pillows type mask, the Amara View is a full face mask. Not sure about the Dreamstation but on the Resmed Airsense there are different settings for each mask type. RE: P10 & Dreamstation - MitchS - 06-21-2017 I set the Mask Setting (resistance control) at x2 on my DreamStation Pro. RE: P10 & Dreamstation - rouxster - 06-21-2017 I've heard that the Airsense has a setting for the type of mask (nasal, nasal pillows, full face, etc.)  It sounds like the Dreamstation doesn't have this type of setting? RE: P10 & Dreamstation - st8800 - 06-21-2017 Yes, it does... I use X1 for Dreamwear and X2 for Nuance Pro Mask RE: P10 & Dreamstation - dmeRT - 06-22-2017 I usually set it to x1 for full face masks. and x2 for nasal pillows. you don't "need" to change it, but you can. RE: P10 & Dreamstation - Scott C. - 06-22-2017 The Dreamstation Auto c-pap has a mask type setting in the menu under My set-up. You have a choice of X1 - X5. And you should be able to see on the packaging that your mask came in one of those numbers. I have read this number tells the machine how much built in leakage the mask has. And this in turn helps the machine calculate leakage data. RE: P10 & Dreamstation - C0mbe - 06-24-2017 If you aren't using a PR mask, PR advises that you don't change the mask resistance setting (X1,X2 etc). just set it to off.