+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: Beginning care questions (/Thread-Beginning-care-questions)
Pages:
1
2
Beginning care questions - Iamthedoctor - 07-26-2017
I got a new machine from a friend that ended up with a bpap
I Know I don't have a doctor
I used it 3 nights and worked well but in the 4/5 nights it stopped letting me exhaust thru elbow vent ( no setting change)
I'm confused
1)Is it suppose to allow exhale out of the elbow,or are you supposed to exhale thru the small vent holes ?
2)AA valve is new I don't know how it could be defective it's simple
I'm wondering if the machine is defective?
I hate the mask but I got it
Im a nose breather tooth grinder
Pillows are in my future
3)looking in to sleepyhead
What is differences between myair and sleepyhead?
Thanks I'm stupid and new
smack me I'll learn faster
RE: Beginning care questions - OpalRose - 07-26-2017
Hi Iamthedoctor,
Could you be more specific?
Do you have the ResMed AirSense 10 Cpap, Elite or AutoSet? If you have the A10 Cpap, this is pretty much what we call a "brick" as it cannot give you any data. The Elite and AutoSet will work fine with #SleepyHead.
What is the name of your mask? All masks have exhaust vents for breathing out.
MyAir gives limited information. Downloading #SleepyHead is your best bet.
RE: Beginning care questions - DavePaulson - 07-27-2017
Update your profile to reflect your machine model, current settings and mask. Make sure you have an SD card in your machine. The AA valve is to let air in in a power or mechanical failure. The other vent holes should have air going out at all times when the machine is runing. If you could post a couple of daily charts from [url=https://OSCAR Official Download Page ----> CLICK HERE ./]SleepyHead[/url], this is the software that people on the forum are used to working with, it provides a wealth of information about your treatment. There is a guide to useing it here. Beginner's Guide to SleepyHead. Reports from other software would be ok if that is what you are using already. There are a couple of guides on how to post and organize your charts here. Posting an Image in 5 Easy Steps Organize your SleepyHead Charts. If you need more help with any aspect of posting data don't hesitate to ask.
Best of luck,
Dave
RE: Beginning care questions - cate1898 - 07-27-2017
Welcome to the forum Iamthedoctor! Glad you found us! Hope you get everything sorted out and can then get some quality CPAP treatment.
RE: Beginning care questions - Iamthedoctor - 07-27-2017
Resmed airsense 10 autoset with humidifier and heated hose
Mask is resmed Quattro fx with full head gear
I know all masks have exhausting vents
But I'm trying to say both vents were working now only the small ones are working making it hard to exhaust
I don't know what is right or wrong but it changed without touching the thing
I'm looking into sleepyhead
I will post when I have it
RE: Beginning care questions - PaulaO2 - 07-27-2017
Have you taken apart the mask recently? If so, make sure it is back together correctly. Even us old farts make mistakes on that. Go to YouTube and find videos on the mask. I had an adapter on the wrong end for, like, half a year until I looked at the video.
RE: Beginning care questions - Iamthedoctor - 07-27-2017
Thanks Paula
But I never have taken it apart
The change happened without anything different
RE: Beginning care questions - PaytonA - 07-27-2017
The vents in the elbow should be closed off by the flapper valve while the machine is applying air pressure. It is only when there is no or too little air flowing that the vents in the elbow should be open. I would guess the someone (maybe the previous owner) disassembled the mask to clean it and did not get the flapper reinstalled properly so that it was not operating properly when you first got it. Somehow it worked itself into the correct position and is now working properly.
Regards
PaytonA
RE: Beginning care questions - Iamthedoctor - 07-27-2017
Paytona
So while using machine with pressure its normal that the exhaust goes only thru the pin sized vent??
So the first three night were a fluke?
Thanks for the info
RE: Beginning care questions - justMongo - 07-27-2017
Yes, the pin size vents along the top front. There are perhaps two dozen of those holes.
At your 10 cm-water pressure, they probably vent about 20 Liters per minute.
Your minute volume is probably around 8 LPM (that volume you take in and expel over one minute)
So your mask vent(s) flush the expelled carbon dioxide out the vents.
If the anti-asphyxia valve (AAV) in the elbow doesn't close, the machine cannot output enough flow to reach pressure.
The AAV is there to permit you to breathe through it should the power fail, et cetera. They are incorporated into all full-face masks as a safety feature.