+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: Adjusting System One RemStar Pro with C-Flex+ (450P) settings (/Thread-Adjusting-System-One-RemStar-Pro-with-C-Flex-450P-settings)
Pages:
1
2
Adjusting System One RemStar Pro with C-Flex+ (450P) settings - p28312 - 11-25-2012
I am able to get into the clinician menu, but Im not sure how to get my settings to "stick". If I exit the clinician menu and reinsert my card, the settings are lost. If I try to insert my card while in the clinician menu, I get an SD card error (reinsert card). I just had my pressure changed and they wiped out my Flex+ setting.
also, Im not sure why Im not setup for autoIQ..does this work? I would think this would be better than a constant pressure..
Thanks!
RE: Adjusting System One RemStar Pro with C-Flex+ (450P) settings - trish6hundred - 11-25-2012
Hi
p28312 and WELCOME! to the forum.!
I don't know the answer to your questions but hang in there and someone, will know and be able to help you soon.
Best of luck to you with your CPAP therapy.
RE: Adjusting System One RemStar Pro with C-Flex+ (450P) settings - zonk - 11-25-2012
(11-25-2012, 09:56 PM)p28312 Wrote: If I exit the clinician menu and reinsert my card, the settings are lost. If I try to insert my card while in the clinician menu, I get an SD card error (reinsert card). I just had my pressure changed and they wiped out my Flex+ setting.I don,t use your machine but guess the original setting are locked on the card and doesn't allows any changes to be made
also, Im not sure why Im not setup for autoIQ..does this work? I would think this would be better than a constant pressure..
Thanks!
if this case .. either use the machine without the card or get a new card
flow data need the card to be in the machine while sleeping but stats and compliance get written on the card
don,t know about the IQ but the manual is available via Email (scroll down to section three .. make sure you ask for the right one)
http://www.apneaboard.com/adjust-cpap-pressure/change-cpap-pressure-settings-adjusting-your-machine-with-a-clinician-setup-manual
RE: Adjusting System One RemStar Pro with C-Flex+ (450P) settings - p28312 - 11-25-2012
I think you are right. I must need Encore Pro to write/manage the settings on the card. Thanks!
RE: Adjusting System One RemStar Pro with C-Flex+ (450P) settings - PaulaO2 - 11-25-2012
No, what you need is a new card. Or reformat that one to remove the settings. What you set via the clinician menu will stick.
I don't think it is a matter of the machine writing the settings onto the card but the DME or doc putting the settings onto the card and forces the machine to reset itself when the card is inserted.
RE: Adjusting System One RemStar Pro with C-Flex+ (450P) settings - zonk - 11-26-2012
(11-25-2012, 11:05 PM)p28312 Wrote: I think you are right. I must need Encore Pro to write/manage the settings on the card. Thanks!what Paula said. DME/provider wrote something on the card and locked it so you cannot make any changes to the setting with the card in the machine. if you want make any changes ...leave the card out and don,t put it back
whenever you get a new card, insert into the machine ... the machine write compliance data on the card
the 450 is supported by SleepyHead so you view your own data
RE: Adjusting System One RemStar Pro with C-Flex+ (450P) settings - Sleepster - 11-26-2012
There's a file or two on your SD card that tells the machine to set itself at a certain pressure. Buy a new card and your problems will be over. You might want to hold on to the old one as it's got your data on it. At some point you may want to use your computer to take a look at that data and see how your therapy is going.
BTW, what prompted you to change your pressure?
RE: Adjusting System One RemStar Pro with C-Flex+ (450P) settings - dcgrafix - 11-27-2012
(11-25-2012, 09:56 PM)p28312 Wrote: I am able to get into the clinician menu, but I'm not sure how to get my settings to "stick". If I exit the clinician menu and reinsert my card, the settings are lost. If I try to insert my card while in the clinician menu, I get an SD card error (reinsert card). I just had my pressure changed and they wiped out my Flex+ setting.
also, Im not sure why Im not setup for autoIQ..does this work? I would think this would be better than a constant pressure..
Thanks!
Hi p28312
Welcome
I have a similar machine & I use EncoreBasic & it will allow you to modify your prescription & the SD card will be write locked using the small sliding tab in the side of the SD card, & then you may need to do one other thing
Check you Private Message (PM)
I can send you some info on to do it
RE: Adjusting System One RemStar Pro with C-Flex+ (450P) settings - archangle - 11-27-2012
Encore Basic or Pro can write a new "prescription" on the card. There is an option for "one time" or "locked" prescription settings when Encore writes the prescription to the card. They appear to be stored in some sort of bastardized form on the card that doesn't show up easily in windows.
If they're not locked, they set your machine one time, and then you're OK. If they're "locked," you'll get an SD card error if you try to change the settings.
I agree that formatting the card or putting in a new card should solve the problem. In theory, your compliance data should automatically be written to the new card, although your high resolution data like airflow waveforms will not be on the new card.
RE: Adjusting System One RemStar Pro with C-Flex+ (450P) settings - Sleepster - 11-27-2012
(11-27-2012, 12:57 AM)dcgrafix Wrote: I have a similar machine & I use EncoreBasic & it will allow you to modify your prescription & the SD card will be write locked using the small sliding tab in the side of the SD card,
But if you lock the card using the sliding tab how does new data get written tot he card?