+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: Snore detection? (/Thread-Snore-detection)
Snore detection? - horsepower - 09-17-2018
I recently changed from a Philips System One to a Resmed Airsense 10, and when comparing the sleepyhead charts, the Philips showed values for snore, RERA and a bunch of other things that the Resmed does not show... Should it? Am I missing a configuration or something?
RE: Snore detection? - Crimson Nape - 09-17-2018
Did you create another user profile when you changed machines? If not, I'd try that first since each machine has different reporting parameters.
RE: Snore detection? - horsepower - 09-17-2018
I sure did... I figured that different machines report different things, but I am kind of surprised at the few parameters that the resmed reports.
RE: Snore detection? - Crimson Nape - 09-17-2018
OK, Make sure the Essentials setting (ON by default) is set to the PLUS mode to provide enhanced information.
RE: Snore detection? - Melman - 09-17-2018
My Resmed reports RERAs and snores in Sleepyhead.
RE: Snore detection? - horsepower - 09-17-2018
Thanks guys... I will check into that!
RE: Snore detection? - jaswilliams - 09-17-2018
(09-17-2018, 12:00 PM)horsepower Wrote: I recently changed from a Philips System One to a Resmed Airsense 10, and when comparing the sleepyhead charts, the Philips showed values for snore, RERA and a bunch of other things that the Resmed does not show... Should it? Am I missing a configuration or something?
The Resmed draws a graph for snores. It does not mark it as an event like the Philips. Also the Resmed won’t document RERA unless some occur, after you receive your first RERA the events will display even if none occur
RE: Snore detection? - horsepower - 09-19-2018
Yup, you're right... thats what was throwing me off... The philips would show on the left in red, VS1 and VS2... the resmed only shows it in the graph.
Thanks!!