just a comment on Oscar data input - Printable Version +- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums) +-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area) +--- Forum: Software Support Forum (https://www.apneaboard.com/forums/Forum-Software-Support-Forum) +--- Thread: just a comment on Oscar data input (/Thread-just-a-comment-on-Oscar-data-input) |
just a comment on Oscar data input - storywizard - 05-18-2019 I am sorry that Oscar does not seem to allow you to choose not to import short sessions, I liked that feature in SleepyHead... Storywizard RE: just a comment on Oscar data input - GuyScharf - 05-18-2019 That feature disappeared in SleepyHead 1.1.0, and OSCAR is a fork of SleepyHead 1.1.0. RE: just a comment on Oscar data input - sheepless - 05-19-2019 I second this concern but for a different reason: Oscar seems to combine and/or ignore short sessions by default. because fragmentation is an issue for me, I want to see and document all sessions and significant wake periods between sessions. RE: just a comment on Oscar data input - GuyScharf - 05-19-2019 OSCAR should treat short sessions the same as SleepyHead 1.1.0 -- and that may be different from the way SleepyHead 1.0.0-beta -2 (or earlier) treated short sessions! Certainly SH 1.0.0-beta-2 had options for short sessions that were removed in SH 1.1.0 before OSCAR was forked from it. It would be interesting to know whether your experience with short sessions in OSCAR is matched by SH 1.1.0. If it is not matched, then we have a recent problem. If OSCAR behaves the same was as SH 1.1.0 (which I suspect will be the case), we do have an issue in our log about this issue, so we are not going to forget about it. RE: just a comment on Oscar data input - sheepless - 05-19-2019 I use SH 1.0.0 beta 2 broken gl because 1.1.0 wouldn't retain the epap pressure waveform (apparently fixed in oscar!). plenty of other issues like missing stats but the missing pressure line made it impractical to use. consequently I no longer have 1.1.0 installed to verify but I do suspect the missing combine sessions options are carried over from 1.1.0. just wanted to get on the record. |