+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: Backup power system for Aircurve 10 ASV and oxygen concentrator (/Thread-Backup-power-system-for-Aircurve-10-ASV-and-oxygen-concentrator)
Backup power system for Aircurve 10 ASV and oxygen concentrator - KallyA - 07-12-2019
I have been trying to research what I would need as a backup power supply to keep my Resmed Aircurve 10 ASV and Everflo oxygen concentrator running when the electricity goes out. I don't understand amps, volts, watts, etc. so naturally I am having trouble with this. Would a Yeti 1000 Lithium power station power everything? Or would something smaller work as well? And would I need an adaptor of some kind?
My epap is 11, my ps is 3-14.
humidity is pretty high, but can get through on one fill per night
oxygen concentrator is at 3 L/min if that matters
RE: Backup power system for Aircurve 10 ASV and oxygen concentrator - KallyA - 07-12-2019
oops. That didn't work well! Unable to edit, so please delete! I will try again.
Backup power system for Resmed Aircurve 10 ASV and oxygen concentrator - KallyA - 07-12-2019
I have been trying to research what I would need as a backup power supply to keep my Resmed Aircurve 10 ASV and Everflo oxygen concentrator running when the electricity goes out. I don't understand amps, volts, watts, etc. so naturally I am having trouble with this. Would a Yeti 1000 Lithium power station power everything? Or would something smaller work as well? And would I need an adaptor of some kind?
My epap is 11, my ps is 3-14.
humidity is pretty high, but can get through on one fill per night
oxygen concentrator is at 3 L/min if that matters
Info from the mfgs:
oxygen concentrator: 120 VAC ±10%, 350 W, 60 Hz
ASV:
[attachment=13575]
Goal Zero Yeti 1000 Lithium Portable Power Station
[attachment=13576]
RE: Backup power system for Aircurve 10 ASV and oxygen concentrator - Crimson Nape - 07-12-2019
Please review this thread on posting images here on Apnea Board.
How to post images and attachments
RE: Backup power system for Aircurve 10 ASV and oxygen concentrator - E.W. - 07-12-2019
No. Powering your cpap is no big deal but that concentrator is another matter entirely.
Actually I am in the same situation you are and have a battery backup for my apap but
don't have anything for the oxygen concentrator. Well here is the math : That supply
is rated at 1050wh. This means it can supply 1050Watts for 1 hr. So assuming your cpcp
draws 50Watts and your concentrator uses 350Watts that's 400Watt. Simply divide 1050 by
400 and you get 2.625 hrs. But often when something says 350W it actually doesn't consume
that much power still I doubt that supply will run both of them all night
RE: Backup power system for Aircurve 10 ASV and oxygen concentrator - Sleepster - 07-12-2019
If weight and size are not an issue then lead acid batteries will work better and cost less than lithium ion.
RE: Backup power system for Aircurve 10 ASV and oxygen concentrator - Sleeprider - 07-12-2019
Kally, the cost of that Yeti 1000 is very expensive, and you are getting into the realm of being able to purchase a generator with remote or auto-start and switch gear to connect to household power. These can run for hours or days if needed and can run the important circuits in your home. Generators generally include power inverters so they produce AC power.
RE: Backup power system for Aircurve 10 ASV and oxygen concentrator - RayBee - 07-13-2019
Hi Kally,
I looked into this option for my ResMed ASV backup needs too. No O2 though. The bottom line is, a generator for your equipment does make a lot of sense. Here's why.
If you want to power everything on batteries, there are a lot of variables to consider. The rated power (in Watts) for the two devices is normally the Max power rating. Not based on the average consumption of power. You would have to measure the consumption to get a closer average and that can vary widely based on a lot of operational variables.
Batteries will lose capacity as they age - assuming you go the route of say 85Ah car batteries to help keep the cost down. And lastly all of the conversion equipment in use will have efficiency ratings unknown here. But power conversions through these devices will never be 100% efficient.
So, my rough calculations in a perfect world with what we know would put three 85Ah car batteries (3,060 Watt Hours / 440 Watts) giving you 7 hours of run time on the equipment. And four batteries (4,080 Wtt Hours / 44 Watts) would be 9.3 hours of run time. But none of that is realistic. Only fuzzy numbers.
Now throw in the regular maintenance of the lead acid car batteries, possible corrosion problems, possible hydrogen out-gassing, periodic replacement of the entire bank of batteries as they age and likely storing them outside in a weather protected enclosure. Yup a big PIA.
Now with an emergency generator as backup power you can get one that runs on natural gas, LP or gasoline, size it for just your medical equipment, possibly add a few other critical appliance, or get one that will run your entire home. Very minimal maintenance and a clean system. You just need to have the room in your yard to place one far enough from the house per code requirements so exhaust gasses won't be a problem.
Lots to consider. Best of luck.
RE: Backup power system for Aircurve 10 ASV and oxygen concentrator - ardenum - 07-13-2019
Go to the next post.
RE: Backup power system for Aircurve 10 ASV and oxygen concentrator - ardenum - 07-13-2019
I wrote a long post then hit back on my mouse. To make it short:
You need around 25kWh stack to power both devices for 8h each day for 7 days. Why?
ASV: 8h = 800Wh, 56h(7days) = 5.6kWh
Concentrator : 8h = 2.8kWh, 56h(7days) = 19.6kWh
For my 50kWh I paid over $10k, that's just the stack, then comes converters, switches etc.
I can power my whole home with it, but it also gets recharged with my panels each day .