+- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums)
+-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area)
+--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum)
+--- Thread: How to go from Fixed to Auto Pressure - Dreamstation CPAP Auto (/Thread-How-to-go-from-Fixed-to-Auto-Pressure-Dreamstation-CPAP-Auto)
How to go from Fixed to Auto Pressure - Dreamstation CPAP Auto - pumpkin - 11-04-2019
I have a Dreamstation AUTO Cpap machine. it was set on auto with a range between
4 and 10. I somehow got the darn thing to where all I have is a fixed pressure of 8.
I cannot seem to get this back to Auto.
When I press the Ramp and front Button for 5 seconds it turns on but all I get is
My Setup-My Info-Preheat-My Provider. that is all. I do not get what my manual says
I should be getting, which is: Therapy Settings-Comfort Settings-Device Settings, etc.
If I click on My Settings I get Ramp Mask Type and Tube Type and several others but
noting about Therapy Settings which is where I think I need to be.
Anybody know how to get my machine back to where I can get to Auto again? Thanks
for any help.
RE: How to go from Fixed to Auto Pressure - Dreamstation CPAP Auto - ragtopcircus - 11-04-2019
You will need to go to the Provider menu. If you don't have the Clinician Guide already, I suggest downloading it.
RE: How to go from Fixed to Auto Pressure - Dreamstation CPAP Auto - Sleeprider - 11-04-2019
Apnea Board allows provides the setup manuals at no cost, just follow instructions https://www.apneaboard.com/adjust-cpap-pressure/change-cpap-pressure-settings-adjusting-your-machine-with-a-clinician-setup-manual
For your Dreamstation, just follow this simple tutorial and be sure you are in Auto mode with minimum and maximum pressure set where you want https://www.apneaboard.com/dreamstation-clinician-setup-instructions