Dreamwear hose connector? - Printable Version +- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums) +-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area) +--- Forum: Main Apnea Board Forum (https://www.apneaboard.com/forums/Forum-Main-Apnea-Board-Forum) +--- Thread: Dreamwear hose connector? (/Thread-Dreamwear-hose-connector) |
Dreamwear hose connector? - Dawnstar - 01-19-2020 A friend is using the Dreamwear full face mask and needs the hose connector for an additional hose. He and I have looked and it’s really not clear which part he needs to get this. Does it come with the right angle mask frame connector? RE: Dreamwear hose connector? - Nightynite - 01-20-2020 Yes it comes with the 90 degree built in hose connector. It can not be removed. RE: Dreamwear hose connector? - Dawnstar - 01-20-2020 Thanks. The non removability of the quick connect adaptor would appear to be something of a flaw in the Dreamwear system. RE: Dreamwear hose connector? - Nightynite - 01-20-2020 It comes with an insert that goes in side your hose, and that makes it a quick disconnect from the 90degree elbow. So yes the quick disconnect is removable. RE: Dreamwear hose connector? - Nightynite - 01-20-2020 After looking at it closely I think the 90 elbow will also snap on and off. I saw where you can buy just the elbow and that made me take a second look. RE: Dreamwear hose connector? - Dawnstar - 01-20-2020 I was referring to the adapter that’s inserted into the hose, you (and my friend) said it’s not removable. That is something of a problem if you wanted to ever use the hose with another non Dreamwear mask. RE: Dreamwear hose connector? - Nightynite - 01-20-2020 You can pull the insert back out of the hose with some effort. RE: Dreamwear hose connector? - Clay L - 01-20-2020 On mine the adapter stays on the elbow when I remove the hose. It can be removed from the elbow however. My wife's is the same. RE: Dreamwear hose connector? - Nightynite - 01-20-2020 (01-20-2020, 12:52 PM)Clay L Wrote: On mine the adapter stays on the elbow when I remove the hose. It can be removed from the elbow however. My wife's is the same. It you take that adapter and wiggle it all the way into the hose, then your hose should attach and detach to your elbow with just a click when you pull on it. That’s the way it’s designed to work. It sounds like the way your doing it, you probably have to wiggle the hose back in forth slowly and eventually the hose pops off. Try this: Just pull that white adapter off by hand and work it all the way into your hose first. It stays there permanently. Now click your hose to your mask. Attaching and detaching of the hose is just a click. No wiggle back in forth required. |