Leak Rate Waveform - Printable Version +- Apnea Board Forum - CPAP | Sleep Apnea (https://www.apneaboard.com/forums) +-- Forum: Public Area (https://www.apneaboard.com/forums/Forum-Public-Area) +--- Forum: Software Support Forum (https://www.apneaboard.com/forums/Forum-Software-Support-Forum) +--- Thread: Leak Rate Waveform (/Thread-Leak-Rate-Waveform) |
Leak Rate Waveform - BrassCat - 04-08-2020 Hello the forum. Thanks for all the support. I am confused concerning my leak rate waveform. See included screen shot. I would understand the lower line indicates the current leak rate. Makes sense. The upper line I am understanding would indicate the ACCUMULATED leak volume. But it starts out high. I would expect it to start at zero and slowly rise! Obviously I am misunderstanding what this line represents. Best help, Stan RE: Leak Rate Waveform - edfreeman - 04-08-2020 Total leaks includes the air flow through the mask vents. You can turn it off under "Preferences" under "File" at the top. Click on the "Waveforms" tab. RE: Leak Rate Waveform - sawinglogz - 04-08-2020 Note that, for PRS1, the CPAP and BiPAP models only report the total leak, and OSCAR is estimating the unintentional leak from that. I have no idea how accurate that estimate is. The ASV and S/T and AVAPS ventilators all report the unintentional leak as well as the total leak. RE: Leak Rate Waveform - Gideon - 04-08-2020 (04-08-2020, 08:11 PM)sawinglogz Wrote: Note that, for PRS1, the CPAP and BiPAP models only report the total leak, and OSCAR is estimating the unintentional leak from that. I have no idea how accurate that estimate is.we will need to flag that as an OSCAR calc vs a vendor calc before 1.2.0 RE: Leak Rate Waveform - sawinglogz - 04-09-2020 Agreed. That's one of many of attributes of channels that we'll want to add. (Another being whether the channel is an average interval that should be drawn as a square wave plot vs. continuous data that should be a linear graph. This varies by manufacturer.) |